Abstract:Ni-based single crystal superalloys are the main constituent materials for aeroengine turbine blades. They are subjected to extensive in-service plastic deformation and creep-fatigue interaction, which can cause damage and failure and hence limit the turbine blade durability. In this study, a novel crystal plasticity-based constitutive model is proposed to predict the cyclic inelastic deformation of Ni-based single crystal superalloy under creep-fatigue loads, and the key aspects examined include cyclic strain hardening, ratcheting and stress relaxation behavior. The novelty of the model lies in the introduction of a dislocation density parameter in the kinematic hardening rule to describe the evolutionary characteristics of hysteresis loops. The constitutive model is implemented via the crystal plasticity finite element method and the predictions are in good agreement with experimental results. Furthermore, thermodynamic entropy generation is innovatively adopted as an indicator parameter for analysis of Ni-based single crystal creep-fatigue failure, and the corresponding creep and fatigue damage models are developed to evaluate the degree of damage. The half-life concept associated with the steady-state hysteresis loop is employed in the failure model to predict the creep-fatigue life without being limited by the computational efficiency of the crystal plasticity finite element method. The proposed model can well capture the characteristics of Ni-based single crystal creep-fatigue life, and the prediction falls within a scatter band of factor 2.0 compared to experimental results. The proposed creep-fatigue life prediction model is underpinned by deformation and failure mechanisms, which would provide a basis for accurate analysis and robust assessment of Ni-based single crystal superalloy performance and life.

Dislocation-based crystal plasticity modelling of a nickel-based superalloy under dwell-fatigue: From life prediction to residual life assessment

A Study of Fatigue Mesoscopic Elasto-Plastic Properties of a Nickel-Base Superalloy by Instrumented Microindentation Measurements

A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy

Life prediction and damage analysis of creep-fatigue combined with high-low cycle loading by using a crystal plasticity-based approach

Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650°C

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Cycle-dependent creep-fatigue deformation and life predictions in a nickel-based superalloy at elevated temperature

Parametric Study of Cyclic Plasticity Behavior in a Directionally Solidified Superalloy with Partial Recrystallization by Crystal Plasticity Finite Element Simulation

Fatigue Life Prediction of Film-cooling Hole Specimens with Initial Damage

Crystal plasticity constitutive model and thermodynamics informed creep-fatigue life prediction model for Ni-based single crystal superalloy

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Elevating Fatigue Life in Nickel-Based Superalloys Through Suppression of Persistent Slip Bands/markings Via High-Density Pulsed Electric Current Treatment

A new data-driven probabilistic fatigue life prediction framework informed by experiments and multiscale simulation

A dual-scale modelling approach for creep-fatigue crack initiation life prediction of holed structure in a nickel-based superalloy

Creep-fatigue life prediction in nickel-based superalloy GH4169 based on microstructural damage quantification with the help of electron backscatter diffraction

A novel very-high-cycle-fatigue life prediction model with interior microstructure induced cracking behavior of Inconel-713C superalloy at 25 °C, 750 °C and 1000 °C

A Low Cycle Fatigue Life Prediction Model Of Single Crystal Nickel-Based Superalloys Using Critical Plane Approach Combined With Crystallographic Slip Theory

Multi-stage dwell fatigue crack growth behaviors in a nickel-based superalloy at elevated temperature

Experimental and simulated investigations of low cycle fatigue behavior in a nickel-based superalloy with different volume fractions of δ phase

A CDM model for remaining fatigue-lifetime prediction of ductile metals

Fretting Fatigue Experiment and Polycrystal Plasticity Simulation in Ni-based Superalloy at Room Temperature and 650 °C