Fatigue Fracture Analysis on 2524 Aluminum Alloy with the Influence of Creep-Aging Forming Processes
Liyong Ma,Chi Liu,Minglei Ma,Zhanying Wang,Donghao Wu,Lijuan Liu,Mingxing Song
DOI: https://doi.org/10.3390/ma15093244
IF: 3.4
2022-04-30
Materials
Abstract:The different creep-aging forming processes of 2524 aluminum alloy were taken as the research object, and the effects of creep-aging temperature and creep stress on the fatigue-crack propagation properties of the alloy were studied. The research results showed the following under the same sintering time of 9 h, at creep-aging temperatures of 100 °C, 130 °C, 160 °C, and 180 °C, respectively, with an increase in creep-aging temperature: the fatigue-crack propagation rate was promoted, the spacing of fatigue striations increased, and the sizes of dimples decreased while the number was enlarged; this proves that the fatigue property of the alloy was weakened. Compared with the specimens with creep deformation radii of 1000 mm and 1500 mm, the creep deformation stress was the smallest when the forming radius was 1800 mm, with a higher threshold value of fatigue-crack growth in the near-threshold region of fatigue-crack propagation (ΔK ≤ 8 MPa·m1/2). Under the same fatigue cycle, the specimens under the action of larger creep stress endured a longer fatigue stable-propagation time and a faster fracture speed. Comparing the effect of creep-aging temperature and creep stress, the creep-aging temperature plays a dominant role in the fatigue-crack propagation of creep-aged 2524 aluminum alloy.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering