Abstract:In order to prepare black silicon material with excellent optical absorption performance for solar cell application, a micro/nano bilayer-structure is formed on the surface of textured silicon wafer by a silver assisted chemical etching method. It is found that the deeper nanoholes could form as the etching time is longer, and the surface reflectivity is reduced obviously due to the increased time of photon reflection from the nanowires. The incident light reflectivity of the prepared black silicon is significantly reduced to 2.3%, showing obviously better optical reflectance characteristics than general monocrystalline silicon wafer, especially in a wavelength range of 300-830 nm. Considering the fact that a large number of carrier recombination centers is introduced into the nanostructured crystal silicon surface, BiFeO3/ITO composite film is coated on the surface of the black silicon solar cell by magnetron sputtering process to optimize the surface defect states and improve the cell performance. The experimental results show that the lengths of the nanowires are predominantly in a range of 180-320 nm for the prepared black silicon with micro/nano double-layer structure. The reflectivity of the incident light is below 5% in a wavelength range from 300 nm to 1000 nm, and reaches a maximal value at about 700 nm. The reflectance increases slightly as BiFeO3/ITO composite film is coated on the surface of black silicon solar cell, but it is still much lower than that of general monocrystalline silicon solar cell. The open circuit voltage and short circuit current density of the black silicon solar cell increase respectively from 0.61 V to 0.68 V and from 28.42 mA/cm2to 34.57 mA/cm2after it has been coated with BiFeO3/ITO composite film, and the photoelectric conversion efficiency of the cell increases from 13.3% to 16.8% accordingly. The improvement in performance of black silicon solar cell is mainly due to the promotion of effective separation of photogenerated carriers, thereby enhancing the spectral response of black silicon solar cell in the whole wavelength range. This indicates that the spontaneously polarized BiFeO3film can play a better role in improving the surface properties of black silicon solar cell. On the other hand, for the BiFeO3film deposited on the surface of black silicon, a spontaneous polarization positive electric field could be produced, pointing from the film surface to the inside of the solar cell. This polarization electric field could also act as part of built-in electric field to contribute the photoelectric transformation of the black silicon solar cell, leading to the open circuit voltage of cell increasing from 0.61 V to 0.68 V. © 2017 Chinese Physical Society.

Preparation and Photoelectric Properties of the Polycrystalline Silicon Solar Cells Depositing Sb2Ox Nano-Films

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Application of Silicon Nanocrystals in Solar Cells

SPUTTER-GROWN Sb-DOPED SILICON NANOCRYSTALS EMBEDDED IN SILICON-RICH CARBIDE FOR Si HETEROJUNCTION SOLAR CELLS

Grain Engineering of Sb2S3 Thin Films to Enable Efficient Planar Solar Cells with High Open‐Circuit Voltage

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

Performance investigation of black silicon solar cells with surface passivated by BiFeO3/ITO composite film

Realization of Improved Efficiency on Nanostructured Multicrystalline Silicon Solar Cells for Mass Production

SiOx/polysilicon selective emitter prepared by PECVD-deposited amorphous silicon plus one-step firing enabling excellent J0,met of < 235 fA/cm2 and ρc of < 2 mΩ·cm2

Theoretical simulation and experimental perspective of refractive index-controlled silicon nanofilms for solar cell efficiency improvement

Enhancement in the efficiency of Sb2(S,Se)3 thin-film solar cells with Spin-coating NiOx as the hole transport layer

Efficient Sb2Se3 Sensitized Solar Cells Prepared Through a Facile SILAR Process and Improved Performance by Interface Modification

Fabrication and enhanced photoelectric properties of novel Bi9O7.5S6/CdS composite film

Improved Photovoltaic Performance of MEH‐PPV/PCBM Solar Cells Via Incorporation of Si Nanocrystals

Direct Solution Deposition of Device Quality Sb2S3-xSex Films for High Efficiency Solar Cells

Improved performance of polymer solar cells by doping with Bi2O2S nanocrystals

Enhanced Photovoltaic Properties in Sb2S3 Planar Heterojunction Solar Cell with a Fast Selenylation Approach

Efficiency Improvement of Flexible A-Sige:H Solar Cells Decorated by Sinx Composite Nanostructures

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Improved Efficiency by Insertion of Zn1−xMgxO Through Sol-Gel Method in ZnO/Sb2Se3 Solar Cell

Enhanced Device Performance of Si Nanowires/si Nanocrystals Heterojunction Solar Cells with Ultrathin Al2O3 Passivation