Abstract:To improve the thermal efficiency of gas fired equipment, latent heat recovery from the flue gas is a very important concept. Based on the analysis of heat transfer enhancement mechanism in an internally finned tube, in this paper, a new type left–right symmetric internally finned tube is proposed. The heat transfer characteristics of the new type left–right symmetric internally finned tube, the centrosymmetric finned tube and the smooth tube is numerically and experimentally investigated. The numerical simulation results indicate that the left–right symmetric internally finned tube has a promising potential for enhancing the convection heat transfer, in particular, its heat transfer coefficient is 4–8 times higher than that of the reference smooth tube and 1.3–1.8 times higher than that of the centrosymmetric finned tube. The experimental results show that the excess air coefficient, the cooling water flow rate, the water inlet temperature, and the Re number have prominent effects on the convection-condensation heat transfer. The left–right symmetric internally finned tube can effectively decrease the radial temperature gradient, reduce the thickness of the non-condensable gas layer and significantly strengthen the water vapor condensation. The convection-condensation heat transfer coefficient of 10 fins left–right symmetric internally finned tube is about 4.1 times higher than that of the forced convection without condensation. A dimensionless number Tv is derived, which takes into account the effects of the water vapor saturation temperature, the average flue gas temperature, the average internal wall temperature and the inlet water temperature. They are represented in an empirical formula for the condensation heat transfer process.

Heat Transfer and Pressure Drop Performance Evaluation of Twisted and Bent Fins when Steam Flows Through the Tubes

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Research on Gas Side Performance of Staggered Fin-Tube Bundles with Different Serrated Fin Geometries

Numerical Study on the Heat Transfer and Pressure Drop Characteristics of Fin-and-tube Surface with Four Round-Convex Strips Around Each Tube

Experimental Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube

Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of H-type Finned Tube Banks

Heat Transfer Enhancement of Partially Serrated Twisted Finned Tube Bank

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

Heat transfer enhancement of a partially serrated twisted finned tube with non-grooving on the leeward side

Experimental Study on the Pressure Drop and Heat Transfer of Two Different Tubes With Plain-Rectangle Internal Fins

Effect of Fin Types and Prandtl Number on Performance of Plate-Fin Heat Exchanger: Experimental and Numerical Assessment

Numerical study and experimental verification of transverse direction type serrated fins and field synergy principle analysis

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Computational analysis of heat transfer and pressure drop performance for internally finned tubes with three different longitudinal wavy fins

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Convective Heat Transfer and Pressure Drop of Annular Tubes with Three Different Internal Longitudinal Fins

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Experimental and Numerical Studies on Actual Flue Gas Condensation Heat Transfer in a Left–right Symmetric Internally Finned Tube

Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows