Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

Effect of Microstructure Anisotropy on the Spalling Behavior of Oxide Film of Hastelloy X Alloy Fabricated by Selective Laser Melting (slm) During the Cyclic Oxidation Process

Insight into the Anisotropic Spallation Behavior of Oxidation Film During the Cyclic Oxidation Process for Hastelloy X Alloy Fabricated by Laser Powder-Bed Fusion (L-Pbf)

The anisotropic oxidation behavior of Hastelloy X alloy fabricated by laser powder-bed fusion (LPBF) during the cyclic oxidation process

Oxidation behavior of Hastelloy X alloy fabricated by selective laser melting and subsequent hot isostatic pressing treatment

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion

Effect of layer thickness on spatters oxidation of Hastelloy X alloy during powder bed fusion-laser beam processing

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Effect of Microstructure on Early Oxidation of MCrAlY Coatings

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

Selective laser melting of Hastelloy-X alloy and cerium oxide reinforced Hastelloy-X composite: microstructural examination and corrosion behavior

Investigation of Microstructure and Failure Mechanisms at Room and Elevated Temperature of Hastelloy X Produced by Laser Powder-Bed Fusion

Electrochemical Anisotropy of Hastelloy X Fabricated by Selective Laser Melting in a NaNO 3 Solution

Effect of Alloyed Lu, Hf and Cr on the Oxidation and Spallation Behavior of NiAl

Microstructure and Mechanical Properties of Hastelloy-X Produced by Selective Laser Melting

Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting

The Effect of Thickness on the Defects and Anisotropy of Thin-Wall Hastelloy X Fabricated Via Laser Powder-Bed Fusion

Influence of scanning speed on microstructures and mechanical properties of SLM produced Hastelloy X: As-built and solution-treated

Effects of Heat Treatment on High Temperature Mechanical Property and Corrosion Resistance of Hastelloy X Manufactured by Selective Laser Melting

Anisotropic Stress Rupture Properties-Microstructure Relationships in SLM Inconel 718 Alloy