Abstract:The cold start-up of the PEMFC (proton exchange membrane fuel cell) stack from sub-zero temperature is considered one of the significant obstacles to its expansive commercial applications. In the cold start-up process, with the progress of hydrogen/oxygen chemical reaction, the produced water will freeze into ice, occupying the pores of the porous electrode, thus leading to a rapid deterioration of output performance and even making the cold start-up fail. In this work, a one-dimensional numerical model is adopted to study a cold start-up process of the PMEFC stack starting from −30°C. The stepwise-changed current loading mode is employed in the process. An assisted preheating method is used to explore an optimal operating condition for a successful cold start-up. The numerical results are validated by comparing the numerical result with the experimental data in reference, and they agree with the experimental data very well. The results show that the optimal heating power in the studied range is 100 W. As the initial current slope increased, the current peak value increased, but the cold start-up process failed. Also, the start-up time and ice volume fraction are highly dependent on the initial current slope. The optimal initial current slope is 0.7 A/s. Besides, a higher initial current slope will cause a significant inner ohmic resistance. The resistance of CLa (catalyst layer of the anode) is the key and primary part of the total ohmic resistance. The details of the research and the analyzed results will help design the cold start-up strategy for the PEMFC stack start-up from −30°C.

A Comparative Study: the Effect of Current Loading Modes on the Cold Start-Up Process of PEMFC Stack

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C

A Pem Fuel Cell Model for Cold-Start Simulations

Numerical studies of cold-start phenomenon in PEM fuel cells

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

Optimization of fast cold start strategy for PEM fuel cell stack

An efficient cold start strategy for proton exchange membrane fuel cell stacks

Investigation of assisted heating cold start strategies from -40 °C for proton exchange membrane fuel cell stack

Research on Cold Start of Proton-Exchange Membrane Fuel Cells Based on Model Predictive Control

Cold Start Mode Classification Based on the Water State for Proton Exchange Membrane Fuel Cells

Experimental Study on Cold Start Strategies of Fuel Cell Stack: Sensitivity Analysis, Optimization, and Boundaries

Investigation on the temperature uniformity and efficiency of cold start-up for proton exchange membrane fuel cell stack based on catalytic hydrogen/oxygen method

Cold Start of PEMFC Using Alternating Hydrogen Pump: Part I. Mechanistic Modeling

Cold Start of a PEMFC Using Alternating Hydrogen Pump: Part II. Optimization and Comparison with Rapid Self-Heating

Thermal Stability Analysis of Cold Start Processes in PEM Fuel Cells

Study on Fast Cold Start-Up Method of Proton Exchange Membrane Fuel Cell Based on Electric Heating Technology

Experimental and modeling study on dynamic characteristics of a 65 kW dual -stack proton exchange membrane fuel cell system during start -up operation

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Modeling of Fuel Cell Cold Start and Dimension Reduction Simplification Method