Abstract:A packaged filtering power divider (FPD) is presented, investigated and synthesized. The radiation loss and electromagnetic interference are reduced since the FPD is insulated in a completely enclosed substrate-integrated cavity. The isolation performance and transmission property of the proposed FPD are determined by the odd- and even-mode equivalent circuit, respectively. A 3rd-order quasi-elliptic filtering response is attained by the multi-mode filtering sections composed of doubly-stub-loaded parallel-coupled lines. Five extra TZs are generated by both the central-loading (CL) T-shaped stub and side-loading (SL) short-circuited 180° and open-circuited 90° branches, which further improves the selectivity of the passband and suppresses the higher-order harmonics. Two isolation resistors are elaborately placed between the two power-division paths, which significantly improves the isolation level over the whole passband and stopband. The design equations including the position of the TPs and TZs, and the values of the isolation resistors are derived in the synthesis procedure. For verification, an FPD prototype is designed, simulated, and measured. It exhibits advantages in terms of low loss, sharp band-edge skirts as well as wideband rejection and isolation, which is suitable for IoT (Internet of Things) applications and antenna-array feeding networks.

Compact SIDGS Filtering Power Divider with Three-Port 10-Ghz Reflectionless Range

Compact 4.0–5.1 GHz Filtering Power Divider with Low Insertion Loss and Wide Stopband Using RC-Loaded Coupled SIDGS Resonators

A 3.4–7.4-Ghz Filtering Power Divider with Wide Stopband and Low Radiation Loss Using Triple-Mode Hybrid Microstrip/SIDGS Resonator

Filtering Power Divider with Ultrawide Stopband and Wideband Low Radiation Loss Using Substrate Integrated Defected Ground Structure

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

A Compact Balanced-to-Balanced Filtering Gysel Power Divider Using $\lambda _{g}$ /2 Resonators and Short-Stub-Loaded Resonator

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

Compact Bandpass Filter with Wide Stopband and Low Radiation Loss Using Substrate Integrated Defected Ground Structure

A Miniaturized Filtering Power Divider With High Selectivity and Wide Stopband Based on 3D Heterogeneous Integration Technology

Novel 6‐GHz/80.8% fractional bandwidth filtering power divider with ultra‐large coupling coefficient using air‐dielectric broadside‐coupled lines

Self-Packaged Mm-Wave Broadband Air-Filled SIW Filtering Power Divider with Sharp Roll-Off Skirt and High In-Band Isolation

Filtering Power Divider with Wide Stopband Using Open-Stub Loaded Coupled-Line and Hybrid Microstrip T-Stub/DGS Cell

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Compact Cross-Coupled Bandpass Filter with Wide Stopband and Low Radiation Loss Using SIDGS

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Design of Filtering Power Divider with High Frequency Selectivity

High-performance filtering power divider with multiple transmission zeros

Compact Bandpass Filter with Wide Stopband and Low Radiation Using Fully-Packaged Substrate Integrated Defected Ground Structure

Millimeter Wave Dual Wideband Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

Compact Power Divider with Improved Isolation and Bandpass Response