Abstract:Due to the excellent stability of titanium dioxide (TiO2), there is still value in improving its solar-to-hydrogen conversion efficiency through tremendous attempts. Metal sulfides with a narrow bandgap are good candidates to broaden the ultraviolet light absorption of TiO2 into the visible light region. However, sulfides suffer from the photocorrosion issue, leading to poor stability. Herein, a type-II heterojunction of TiO2/In2S3 is fabricated by a hydrothermal method, and a NiFe Prussian blue analog (NFP) overlayer is deposited on the surface of TiO2/In2S3 through a chemical bath deposition technique. Under AM1.5G illumination, a photocurrent density of 1.81 mA cm-2 can be obtained with NFP coated TiO2/In2S3 at 1.23 V vs. reversible hydrogen electrode, which is six folds of the photocurrent of TiO2. This photocurrent value can reach up to about 90% of its theoretical photocurrent. During a 12 h stability test, the TiO2/In2S3/NFP photoanode exhibits a high photocurrent retention of 95.17% after an initial transient decrease. The type-II heterojunction of TiO2/In2S3 can efficiently boost the charge separation because of the built-in electric field and enhance the visible-light absorption because of the narrow bandgap of In2S3. A NFP overlayer serves as the cocatalyst for water oxidation reaction due to its valence changes of nickel and iron elements. NFP cocatalyst can rapidly extract the photogenerated holes from In2S3 and then improve the charge separation/injection efficiencies. Thanks to chemical stability of NFP, its coating can also make In2S3 resistant to photocorrosion by physically separating the photoanode from the electrolyte. Therefore, there is a good synergistic effect between the TiO2/In2S3 heterojunction and NFP cocatalyst. This work provides some crucial insights for the interface engineering and material design in photoelectrochemical systems.

In2S3/F-Fe2O3 Type-Ii Heterojunction Bonded by Interfacial S-O for Enhanced Charge Separation and Transport in Photoelectrochemical Water Oxidation

Interfacial Engineering of In2O3/In2S3 Heterojunction Photoanodes for Photoelectrochemical Water Oxidation

Facile Construction TiO2/ZnIn2S4/Zn0.4Ca0.6In2S4 Ternary Hetero-Structure Photo-Anode with Enhanced Photo-Electrochemical Water-Splitting Performance

In 2 S 3 Nanoparticles Modify the Porous Fe 2 V 4 O 13 Nanostructure Photoanode to Enhance Charge Separation Efficiency and Photoelectrochemical Water Splitting Performance

ITO Regulated High-Performance N-Si/ito/α-fe2o3 Z-scheme Heterostructure Towards Photoelectrochemical Water Splitting

Fabrication of In2O3/In2S3 heterostructures for enhanced photoelectrochemical performance

Enhanced Interface Charge Transfer Via N-N WO3/Ti–Fe2O3 Heterojunction Formation for Water Splitting

NiFe Prussian blue analog cocatalyzed TiO2/In2S3 type-II heterojunction for solar water splitting

Simultaneously Tuning Charge Separation and Surface Reaction in a Fe2O3 Photoanode for Enhanced Photoelectrochemical Water Oxidation

WO 3 /FeOOH heterojunction for improved charge carrier separation and efficient photoelectrochemical water splitting

In Situ Synthesis of Α-Fe2o3/fe3o4 Heterojunction Photoanode Via Fast Flame Annealing for Enhanced Charge Separation and Water Oxidation.

Thin-layer Metal Bismuth Inserted into Bi2S3/C, N Co-Doped Α-Fe2o3 Achieving Efficient Photoelectrochemical Water Oxidation

Coupling effects of indium oxide layer on hematite enabling efficient photoelectrochemical water splitting

Nonstoichiometric In–S Group Yielding Efficient Carrier Transfer Pathway in In2S3 Photoanode for Solar Water Oxidation

Fabrication of Flower-Shaped Sb2S3/Fe2O3 Heterostructures for Enhanced Photoelectrochemical Performance

Metal-Organic Framework-Derived p-Cu2O/n-Ce-Fe2O3 Heterojunction Nanorods Photoanode Coupling with a FeOOH Cocatalyst for High-performance Photoelectrochemical Water Oxidation.

In-situ construction of photoanode with Fe2O3/Fe3O4 heterojunction nanotube array to facilitate charge separation for efficient water splitting

In Situ Synthesis of Ti:Fe2O3/Cu2O P-N Junction for Highly Efficient Photogenerated Carriers Separation

p-n heterojunction constructed by y-Fe2O3 covering CuO with CuFe2O4 interface for visible-light-driven photoelectrochemical water oxidation

Integration of a Cu2O/ZnO heterojunction and Ag@SiO2 into a photoanode for enhanced solar water oxidation

Metal-Organic Framework-Derived p-Cu<sub>2</sub>O/n-Ce-Fe<sub>2</sub>O<sub>3</sub> Heterojunction Nanorod Photoanode Coupling with a FeOOH Cocatalyst for High-Performance Photoelectrochemical Water Oxidation