Abstract:We propose and numerically analyze the hybrid Si-Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} strip waveguide switches for Mid-IR wavelength of 2.1 $\mu$m. The switches investigated are one input-one output (on-off) type and one input-two outputs (directional coupler) type. The reversible transition between the switch states is achieved by inducing the phase transition from crystalline to amorphous and vice-versa by application of voltage pulses. The approach of embedding the nanoscale active material Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} within the Si waveguide is taken to enhance the interaction of light with the active region of the switches. The dimensions of the active regions of the switches are optimized to achieve low insertion loss, low switching energy, and high extinction ratio. In case of one input-one output switch, an extinction ratio of 33.79 dB along with an extremely low insertion loss of 0.52 dB is achieved using optimum Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} length of only 0.92 $\mu$m. For one input-two outputs switch, an extinction ratio of 10.33 dB and 5.23 dB is obtained in cross and bar state respectively using an active length of 52 $\mu$m. These values of extinction ratio, which are otherwise 18.59 dB and 8.33 dB respectively, are due to the necessity of doping the Si beneath the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} to facilitate the electrical conduction needed for Joule heating. A suitable gap of 100 nm is kept between the active and passive arm of the directional coupler switch. The electro-thermal co-simulations confirm that phase change occurs in whole of the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} region in both types of switches.

Optical Switch Based on Ge2Sb2Se4Te1-Assisted Racetrack Microring

All-optically Modulated Nonvolatile Optical Switching Based on a Graded-Index Multimode Fiber.

Symmetric multiplexing 2×2 guideway optical switch based on phase change material

Wavelength-selective 2 × 2 Optical Switch Based on a Ge 2 Sb 2 Te 5 -Assisted Microring

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Electrically Controlled 1 × 2 Tunable Switch Using a Phase Change Material Embedded Silicon Microring.

Development of Traveling Wave BOA Optical Switches

Non-volatile Flexible-Grid Wavelength-Selective Switch Using Subwavelength-Grating-ge2sb2te5-assisted Silicon Microring Resonators

Design of Low Loss 1 × 1 and 1 × 2 Phase-Change Optical Switches with Different Crystalline Phases of Ge2Sb2Te5 Films

Wavelength-Selective 2 × 2 Optical Switch Based on a Ge<inf>2</inf>Sb<inf>2</inf> Te<inf>5</inf>-Assisted Microring for the 2-μm Wavelength Band

Mid-IR non-volatile silicon photonic switches using nanoscale Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} embedded in SOI waveguide

Ge2Sb2Te5 patch embedded ring resonator for optical switching

Multiphysics simulations of a cylindrical waveguide optical switch using phase change materials on silicon

Non-volatile 2 × 2 optical switch using multimode interference in an Sb2Se3-loaded waveguide

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator

Scalable Nonblocking &Lt;inline-Formula> &Lt;tex-Math Notation="latex">$4\times4$ &Lt;/tex-Math> &Lt;/inline-Formula> Silicon Optical Switch Based on Dual-Microring Resonators

Fiber End-Facet Integrated Non-Volatile Optical Switch Based on Ge2Sb2Te5

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

Si1−<i>x</i>Ge<i>x</i>/Si asymmetric 2×2 electro-optical switch of total internal reflection type

Ring-resonator-assisted Optical Switch with High Extinction Ratio