Abstract:We propose and numerically analyze the hybrid Si-Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} strip waveguide switches for Mid-IR wavelength of 2.1 $\mu$m. The switches investigated are one input-one output (on-off) type and one input-two outputs (directional coupler) type. The reversible transition between the switch states is achieved by inducing the phase transition from crystalline to amorphous and vice-versa by application of voltage pulses. The approach of embedding the nanoscale active material Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} within the Si waveguide is taken to enhance the interaction of light with the active region of the switches. The dimensions of the active regions of the switches are optimized to achieve low insertion loss, low switching energy, and high extinction ratio. In case of one input-one output switch, an extinction ratio of 33.79 dB along with an extremely low insertion loss of 0.52 dB is achieved using optimum Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} length of only 0.92 $\mu$m. For one input-two outputs switch, an extinction ratio of 10.33 dB and 5.23 dB is obtained in cross and bar state respectively using an active length of 52 $\mu$m. These values of extinction ratio, which are otherwise 18.59 dB and 8.33 dB respectively, are due to the necessity of doping the Si beneath the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} to facilitate the electrical conduction needed for Joule heating. A suitable gap of 100 nm is kept between the active and passive arm of the directional coupler switch. The electro-thermal co-simulations confirm that phase change occurs in whole of the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} region in both types of switches.

Symmetric multiplexing 2×2 guideway optical switch based on phase change material

All-optically Modulated Nonvolatile Optical Switching Based on a Graded-Index Multimode Fiber.

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Multiphysics simulations of a cylindrical waveguide optical switch using phase change materials on silicon

Optical Switch Based on Ge2Sb2Se4Te1-Assisted Racetrack Microring

Design of a Multi-Functional Integrated Optical Switch Based on Phase Change Materials

Non-volatile 2 × 2 optical switch using multimode interference in an Sb2Se3-loaded waveguide

Design of Phase Change Ge2Sb2Te5 Based On-off Electro-Optic Switch

Ge2Sb2Se4Te1-assisted Non-Volatile Silicon Mode Selective Switch

Electrically Controlled 1 × 2 Tunable Switch Using a Phase Change Material Embedded Silicon Microring.

Wavelength-selective 2 × 2 Optical Switch Based on a Ge 2 Sb 2 Te 5 -Assisted Microring

Design of Low Loss 1 × 1 and 1 × 2 Phase-Change Optical Switches with Different Crystalline Phases of Ge2Sb2Te5 Films

Compact Nonvolatile 2×2 Photonic Switch Based on Two-Mode Interference

Nonvolatile multi-level adjustable optical switch based on the phase change material

Electro-Optical Switch Using Ge2Sb2Te5 Phase-Change Material in a Silicon MZI Structure

Design, Optimization, and Performance Evaluation of GSST Clad Low-Loss Non-Volatile Switches.

Mid-IR non-volatile silicon photonic switches using nanoscale Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} embedded in SOI waveguide

Electrode area dependent switching behavior of Ge<sub>2</sub>Sb<sub>2</sub>Se<sub>4</sub>Te<sub>1</sub> phase change material driven by narrow voltage pulse

Electro-optical switch using Ge<inf>2</inf>Sb<inf>2</inf>Te<inf>5</inf> phase-change material in a silicon MZI structure

Fiber End-Facet Integrated Non-Volatile Optical Switch Based on Ge2Sb2Te5

Compact Non-Volatile Multilevel Sb$_2$Se$_3$ Electro-Optical Switching in the Mid-Infrared Group-IV-Photonics Platform