Revealing impact failure behavior of tungsten composite using instrumented Charpy impact testing
Wentan Zhu,Wensheng Liu,Yunzhu Ma,Shangru Meng,Jianning Wang,Youteng Duan,Qingshan Cai
DOI: https://doi.org/10.1016/j.matchar.2022.112181
IF: 4.537
2022-10-01
Materials Characterization
Abstract:The impact toughness of W-Ni-Fe alloys with different W content (90, 93 and 95 wt%) were studied by means of instrumented Charpy impact testing, and the relationship between impact toughness and microstructural parameters was discussed, with an emphasis on impact failure behavior. With increasing of W content, the elongation decreases from 31% for 90 W to 21% for 95 W, but the tensile strength slightly increases from 940 to 974 MPa and the yield strength increases from 655 to 688 MPa. The impact load-displacement curves reveal that the impact toughness is predominantly controlled by the crack initiation energy and decreased with increasing of W content, whereas the crack propagation energy is relatively low and remains constant. The decrease in the crack initiation energy attributed to a decrease in matrix volume fraction and an increase in W contiguity. 90 W shows the highest crack initiation energy due to the severe plastic deformation during crack initiation process, which contains multiple deformation characteristics such as dislocation tangles, dislocation forest, stacking faults, nano-scaled twins and subgrains. The formation of those features is discussed, and it is found that they are expected to provide a toughening effect. From the perspective of crack nucleation and growth, it is also found that the high crack initiation energy of 90 W profited from the high energy-consuming processes of W cleavage events, micro-crack arrest, blunting and bridging mechanisms. Although these three alloys display different failure features of crack propagation paths, they present similar crack propagation energies. The current study provides a deep insight into the impact failure behavior of WHAs.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing