Abstract:Precipitation strengthening is one of the most effective approaches for developing advanced structural materials with outstanding strength-ductility combinations. However, most compositional designs of precipitate-strengthened HEAs/MEAs compromise the cost-property tradeoff owing to the addition of expensive Co element. In this study, a Co-free FeCrNi-based precipitatestrengthened medium entropy alloy (denoted as Al0.2Cr0.9FeNi2.2Ti0.2) with a near-equiatomic FeCrNi matrix and a high content (similar to 35 %) L1(2) nanoprecipitates was designed using a mixing strategy. The microstructural features, mechanical performance, deformation substructure evolution, and strengthening mechanisms were systematically investigated using EBSD, TEM, and APT. Tensile tests indicated that the current alloy aged within a moderate temperature range achieved an exceptional strength-ductility combination compared to existing Co-containing and Co-free HEAs/MEAs. Particularly, the alloy aged at 700 degrees C(denoted as 700A) demonstrated a high ultimate tensile strength of 1606 MPa and a large ductility of 25 %, benefiting from both precipitation hardening and an unusual strain-hardening sustainability. Such anomalous strainhardening sustainability can be attributed to the dislocation dipole-induced plasticity. Highdensity dislocation dipoles can simultaneously provide additional strain hardening by reducing the dislocation mean free path and enhance plastic deformation compatibility by acting as stress delocalization origins, thereby contributing to excellent strength-ductility synergy. These findings will not only open a new door for the future development of high-performance Co-free precipitate-strengthened HEAs/MEAs, but also deepen the understanding of the work-hardening mechanisms in these alloys.

Unveiling the Precipitation Behavior and Mechanical Properties of Co-free Ni47-xFe30Cr12Mn8AlxTi3 High-Entropy Alloys

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effects of Ni and Al on Precipitation Behavior and Mechanical Properties of Precipitation-Hardened CoCrFeNi High-Entropy Alloys

Tailoring Phase Transformation and Precipitation Features in a Al21Co19.5Fe9.5Ni50 Eutectic High-Entropy Alloy to Achieve Different Strength-Ductility Combinations

Development of High-Strength Co-free High-Entropy Alloys Hardened by Nanosized Precipitates

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

Enhanced strength in Co-free Ni47.5-xFe25Cr25AlxTi2.5 high entropy alloys via introducing dual precipitates

Microstructure and Tensile Properties of Co-free Fe4CrNi(AlTi)x High-Entropy Alloys

Microstructural evolution and mechanical behavior of Co‐free (Fe40Ni30Cr20Al10)100‐x Ti x high‐entropy alloys

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Precipitation Hardening in CoCrFeNi-based High Entropy Alloys

Coherent Precipitation and Strengthening in a Dual-Phase AlNi2Co2Fe1.5Cr1.5 High-Entropy Alloy

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Nanophase Precipitation and Strengthening in a Dual-Phase Al0.5CoCrFeNi High-Entropy Alloy

As-cast Co-free Al 0.4 Ni 0.4 CrFe high entropy alloy with hierarchical coherent precipitates and remarkable mechanical properties

As-cast Co-free Al0.4Ni0.4CrFe High Entropy Alloy with Hierarchical Coherent Precipitates and Remarkable Mechanical Properties

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

A Precipitation-Hardened High-Entropy Alloy with Outstanding Tensile Properties

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion