Abstract:Introducing L12 precipitates into face-centered-cubic (FCC) structured equiatomic CoCrNi medium-entropy alloy (MEA) is an effective means to improve its disappointing strength (<450 MPa) at room temperature. Unfortunately, the L12 precipitates are usually obtained by complicated thermomechanical processing (TMP), accompanying the presence of cellular L12 precipitates at the grain boundaries (GBs) which are detrimental to the mechanical properties. In this work, we designed and fabricated a non-equiatomic Ni35Co27.5Cr27.5Al5Ti5 HEA consisting of sole spherical L12 nanoprecipitates without any other phases via a simplified short-term heat treatment processing, i.e., casting followed by homogenization and aging. The as-cast, homogenized and aged HEA all possess equiaxed grains, in the meantime, the as-cast HEA exhibits equiaxed dendritic microstructure. In the as-cast and aged HEA, spherical L12 nanoprecipitates are uniformly distributed in the FCC matrix, and the L12 nanoprecipitates of the aged HEA have smaller size and higher volume fraction in comparison with those of the as-cast HEA. The aged Ni35Co27.5Cr27.5Al5Ti5 HEA has the best mechanical properties among the three states, exhibiting a tensile yield strength of ~916 MPa, an ultimate tensile strength of ~1220 MPa, and a total elongation of ~21.5%. Precipitation strengthening is primarily responsible for the aged HEA. Digital image correlation (DIC) images corresponding to the tensile testing have shown that the homogenized and aged HEA exhibit uniform deformation, whereas the stress concentration could be observed in the as-cast HEA. Additionally, electron channeling contrast imaging (ECCI) analyses reveal that multiple deformation mechanisms including coherent L12 precipitates, the stacking fault (SF) network, the high-density dislocation walls (HDDWs) and dislocation cells, jointly acted as the dislocation obstacles for the aged HEA, contributing to the excellent strain-hardening ability for the outstanding strength-ductility synergy.

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

An Excellent Combination of Strength and Ductility Via Hierarchical Precipitation Structures in Co-free Medium-Entropy Alloys

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Achieving Excellent Strength-Ductility Synergy in (co, Cr)58ni30mo6al6 High Entropy Alloys by Suppressing Intermetallic Compounds and Introducing Nanoprecipitates

Coupling Precipitation Strengthening and Transformation Induced Plasticity to Produce a Superior Combination of Strength and Ductility in a High Entropy Alloy

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Enhancing Strength-Ductility Synergy in L12-strengthened High-Entropy Alloys Via Microband and Transformation Induced Plasticity

Enhanced Ductility Via High-Density Nanoprecipitates Driven by Chemical Supersaturation in a Flash-Heated Precipitation-Strengthened High-Entropy Alloy

Strengthening Mechanisms and Deformation Behavior of a Non-Equiatomic Ni35co27.5cr27.5al5ti5 High-Entropy Alloy with Spherical L12 Nanoprecipitates

Co-free non-equilibrium medium-entropy alloy with outstanding tensile properties

Unveiling the Precipitation Behavior and Mechanical Properties of Co-free Ni47-xFe30Cr12Mn8AlxTi3 High-Entropy Alloys

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Enhanced strength in Co-free Ni47.5-xFe25Cr25AlxTi2.5 high entropy alloys via introducing dual precipitates

Development of High-Strength Co-free High-Entropy Alloys Hardened by Nanosized Precipitates

Superb Strength and Ductility Balance of a Co-free Medium-Entropy Alloy with Dual Heterogeneous Structures

Precipitate-mediated Metastability of a Hetero-Structured Ferrous High-Entropy Alloy with Superior Strain Hardening Ability

Superior Strength-Ductility Synergy in Additively Manufactured CoCrFeNi High-Entropy Alloys with Multi-Scale Hierarchical Microstructure

Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization

Tuning the microstructure and strengthening mechanism of the CoCrFeNi high-entropy alloy via doping metalloid and interstitial elements

A Precipitate-Free AlCoFeNi Eutectic High-Entropy Alloy with Strong Strain Hardening

Enhancement of Strength and Plasticity by Nanoprecipitation Strengthening and Stacking Fault Deformation in a High Entropy Alloy