Robustness Improvement of FCS-MPTC for Induction Machine Drives Using Disturbance Feedforward Compensation Technique
Liming Yan,Manfeng Dou,Zhiguang Hua,Haitao Zhang,Jianwei Yang
DOI: https://doi.org/10.1109/tpel.2018.2842743
IF: 5.967
2019-01-01
IEEE Transactions on Power Electronics
Abstract:Finite control set-model predictive torque control (FCS-MPTC) has a fast dynamic response because this algorithm directly selects the optimal voltage vector by its cost function for induction machine drives fed by voltage source inverter (VSI). However, belonging to open-loop control paradigm, the FCS-MPTC has torque tracking error due to inevitable load disturbance and mismatched model parameters in reality. In traditional FCS-MPTC, the outer loop, i.e., speed loop, adopts a classic proportional integral (PI) controller, abbreviated as PI-MPTC. The lumped disturbance is only suppressed by a PI controller. However, pole placement of the PI controller is usually designed by cut-and-trial, which is difficult to simultaneously achieve optimal dynamic performance and optimal suppression of lumped disturbance. In this paper, the FCS-MPTC with mismatched parameters is first analyzed. Second, the deficiencies of the traditional PI controller are introduced. Third, disturbance feedforward compensation-based-model predictive torque control (DFCB-MPTC) of induction machine is proposed to compensate lumped disturbance and improve the performance of the system. Furthermore, a simplified stator flux observer is proposed, whose gain matrix is independent of rotor speed. Experimental results verify the feasibility of the proposed DFCB-MPTC. Compared with traditional PI-MPTC, the proposed DFCB-MPTC has better dynamic performance, steady performance, and stronger robustness.