Abstract:Permanent-magnet synchronous machine drive with sine wave filter has features of low insulation stress and current harmonics. However, the filter can affect the current control of machine. Specifically, the increased axes cross-coupling degrades the response performance in the transient state, and the introduced resonant frequency oscillations can make the system unstable. To solve the issues, a complex-vector frequency-domain model of LC -equipped permanent-magnet synchronous machine drive is established in this article. Moreover, a quantitative index related to the symmetrical extent of double-sided frequency responses is introduced to evaluate the performance. A decoupling strategy based on the modified complex-vector controller is proposed and compared against conventional methods in terms of decoupling performance and parameter robustness based on the aforementioned evaluation index. Furthermore, an active damping method based on virtual impedance in parallel with the stator inductance is proposed to suppress the resonance. The quantified double-sided frequency-domain analysis is performed to illustrate the relationship between cross-coupling and system stability. Then, the systematic codesign procedure of decoupling controller and active damping link in the $z$ -domain is proposed. Finally, the experimental results show that the proposed scheme can improve the overall control performance in both transient and steady states.

An Active Damping Control Method for Reduced DC-Link Capacitance PMSM Drives with Low Line Inductance

An Active Damping Method for IPMSM Drive with Small Film DC-Link Capacitor Based on Rectifier Side Current Reconstruction

An Active Damping Control Method for Reduced DC-Link Capacitance IPMSM Drives

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Admittance Reshaping Based on Adaptive Minimum Value of DC-Link Voltage for IPMSM Drive with Small Film Capacitor

Impedance Based Stabilization Control Method for Reduced DC-Link Capacitance IPMSM Drives

Enhanced Inverter Current Control Method for Variable Frequency Drive System with Small Film DC-Link Capacitor

Stability Improvement of V/f Control Scheme with Active Damping for Small Capacitor IPMSM Drive System

Adaptive Virtual Admittance Reshaping-Based Resonance Suppression Strategy for PMSM Drives With Small DC-Link Capacitor

Disturbance Observer-Based Active Damping Control for Electrolytic Capacitor-Less PMSM Drives

Analysis and Design of Passive Damping for LC-Equipped Permanent-Magnet Synchronous Machine Drive System

Grid-Side Current Harmonic Suppression and Power Factor Improvement Using Q – Axis Damping Current Injection for PMSM Drives Without Electrolytic Capacitor

Online Estimation Method of DC-Link Capacitors for Reduced DC-Link Capacitance IPMSM Drives

Feature Extraction of Frequency Mapping Based Resonance Suppression in PMSM Drives with Low DC-link Capacitance and Inductance

Stability Analysis and Improvement of V/Hz Controlled Adjustable Speed Drives Equipped with Small DC-Link Thin Film Capacitors

Single-Motor-Current Feedback Resonance Damping Method for LCL-Equipped HSPMSMs Based on Capacitively Coupled Active Damper

Beat Phenomenon Suppression Method Based on Repetitive Control for Reduced DC-link Capacitance IPMSM Drives

Impedance Reshaping for Inherent Harmonics in PMSM Drives with Small DC-Link Capacitor

An Enhanced Active Damping Control Method for <i>LCL</i>-Type Shunt APFs with Proportional-Resonant-Differential Inverter-Side Current Feedback

A Beat Phenomenon Suppression Method in the Reduced DC-link Capacitance IPMSM Drives

DC-Link Voltage Fluctuation Reduction of Vector Controlled PMSM Drives with Reduced DC-Link Capacitor