Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Explosion Characteristics and Chemical Kinetics of Blended LPG/DME Clean Fuel Based on Pyrolysis and Oxidation Mechanism Model

Effect of Dimethyl Ether (DME) Addition on Sooting Limits in Counterflow Diffusion Flames of Ethylene at Elevated Pressures

Experimental Study on the Explosion Characteristics of NH3/DME/air Mixtures

Experimental study on explosion behavior of propane-dimethyl ether blends

Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/Propane/Oxygen/Argon Mixtures at 20 Bar

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Investigation of C2H6, C2H4, CO and H2 on the explosion pressure behavior of methane/blended fuels

Experimental And Kinetic Study On Ignition Delay Times Of Liquified Petroleum Gas/Dirnethyl Ether Blends In A Shock Tube

Explosion behavior of methane–dimethyl ether/air mixtures

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Influence of equivalence ratio and H 2 blended ratio on explosion propagation characteristics of DME/H 2 blended gas in closed narrow space

Experimental and numerical study on the effects of initial pressure and temperature on the explosion characteristics of LPG mixtures

Exploration on Laminar Flame Propagation of Biogas and DME Mixtures Up to 10 Atm: Insight into Effects of DME Co-Firing, CO2 Addition and Pressure

Investigating the Explosive Characteristics of Hydrogen/ N-Butane Blended Fuel: Experimental and Kinetic Insights

Experimental Study on Explosion Characteristics of Ethanol-Gasoline Blended Fuels

Experimental Study on the Explosion and Flame Emission Behaviors of Methane-Ethylene-air Mixtures

An Experimental and Kinetic Modeling Study on Dimethyl Carbonate (dmc) Pyrolysis and Combustion

Effect of LPG concentration on the combustion of DME/LPG blended fuel by using HCCI

The effects of different equivalence ratios and initial pressures on the explosion of methane/air premixed gas in closed space

Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/n-Butane Blends at a Pressure of 2.0 MPa

Analysis of Methyl Pentanoate/air Mixtures Spherically Expanding Flame Intrinsic Instabilities