Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Effect of LPG concentration on the combustion of DME/LPG blended fuel by using HCCI

NUMERICAL SIMULATION OF HCCI COMBUSTION WITH DME/LPG BLENDED FUEL

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Development and Verification of Simplified Methane/dimethyl Ether Mechanism for Micro-Combustion

Evaluation on the Effects of Compression Ratio, CO2 and LPG on HCCI Combustion Fueled with DME

Numerical Simulation of Chemical Kinetics Mechanism in HCCI Combustion Fueled with Dimethyl Ether

Experimental And Numerical Study On Auto-Ignition And Combustion Of Homogeneous Charge Compression Ignition Fueled With Dimethylether

Experimental And Kinetic Study On Ignition Delay Times Of Liquified Petroleum Gas/Dirnethyl Ether Blends In A Shock Tube

New Control Method for HCCI Combustion by Optimizing DME/LPG Fuel Blending Proportion

Study on combustion and emission of a dimethyl ether-diesel dual-fuel premixed charge compression ignition combustion engine with LPG (liquefied petroleum gas) as ignition inhibitor

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

ANALYSIS OF CHEMICAL KINETICS MECHANISM AT HIGH TEMPERATURE IN HCCI COMBUSTION WITH DIMETHYL ETHER

Study on HCCI Combustion Fueled with DME

Numerical Study on the Effects of CO2 and H2 on Combustion in a Dimethyl Ether HCCI Engine

Study on the Effect of Hydrogen Addition to Dimethyl Ether Homogeneous Charge Compression Ignition Combustion Engine

Study of dimethyl ether homogeneous charge compression ignition combustion process using a multi-dimensional computational fluid dynamics model

Experimental Studies on the Combustion Characteristics and Performance of a Naturally Aspirated, Direct Injection Engine Fuelled with a Liquid Petroleum Gas/diesel Blend

Kinetic Modeling Study of Homogeneous Ignition of Dimethyl Ether/hydrogen and Dimethyl Ether/methane

Experimental and Numerical Simulation Study on HCCI Combustion in DME Engine

Study on the Methanol/n-Heptane Duel Fuel Homogeneous Charge Compression Lgnition Combustion

Search for the Optimizing Control Method of Compound Charge Compression Ignition (ccci) Combustion in an Engine Fueled with Dimethyl Ether