Abstract:Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most popular hole transport materials for replacing traditional high-temperature boron diffusion technology due to its low cost and easy preparation. However, pristine PEDOT:PSS has drawbacks, such as poor work function (WF) and poor film quality, which inhibit the improvement of cell efficiency. According to current research reports, a single dopant can improve only one of these two drawbacks. In this paper, we used Nafion to simultaneously improve the WF and wettability of PEDOT:PSS for preparing novel PEDOT:PSS/n-Si hybrid heterojunction solar cells with a tunnel-oxide passivated contact (TOPCon) back surface field structure, which we call PEDOT:PSS-Nafion (PPN)/n-Si hybrid heterojunction TOPCon solar cell. A cell efficiency of 11.08% was achieved after optimizing the ratio of PEDOT:PSS and Nafion. The three easily improved parameters, namely, series resistance (R S), reflectivity, and WF, were studied and optimized through simulation, achieving a cell efficiency of 20.66%. To reduce R S in the experiment, the Triton X-100-doped PEDOT:PSS film (PPTX) was introduced between the n-Si and PPN films to form highly conductive PPN/PPTX double hole transport layers, and the cell efficiency was increased from 11.08 to 13.7%. The experimental and simulated work presented a new thought and practical guidance for realizing low-cost, easy preparation, and high-efficiency silicon-based solar cells.

High Conductivity PEDOT:PSS Thin Films Affording Improved Open Circuit Voltages in PEDOT:PSS-Si Heterojunction Solar Cells

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Using Easily Prepared Carbon Nanodots to Improve Hole Transport Capacity of Perovskite Solar Cells

Structural transformation of PEDOT on Si/PEDOT:PSS hybrid solar cells by doping hydroquinone

Highly Conductive and Wettable PEDOT:PSS for Simple and Efficient Organic/c‐Si Planar Heterojunction Solar Cells

Simple Solvent Treatment Enabled Improved PEDOT:PSS Performance Toward Highly Efficient Binary Organic Solar Cells

Enhanced Performance of Si/PEDOT: PSS Heterojunction Solar Cells Via Multi-Walled Carbons Coated with Polydopamine

High Performance of PEDOT:PSS/n-Si Solar Cells Based on Textured Surface with AgNWs Electrodes

High-Efficiency Silicon/Organic Heterojunction Solar Cells with Improved Junction Quality and Interface Passivation

High-Efficiency Si-Organic Hybrid Solar Cells Using Au@Mos2 Doped Pedot:Pss

Study on the Fabrication of PEDOT:PSS/Si Hybrid Solar Cells Incorporated with F4TCNQ and VTMO

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer via the Introduction of ITO Nanoparticles and Its Application in Crystalline Silicon/Organic Heterojunction Solar Cells

Interfacial Band Engineering of Highly Efficient PEDOT:PSS/p‐Si/ZnO Heterojunction Solar Cells

Research Progress in Improving the Performance of PEDOT:PSS/Micro- and Nano-textured Si Heterojunction for Hybrid Solar Cells

Performance‐Enhancing Approaches for PEDOT:PSS‐Si Hybrid Solar Cells

Double-Layered PEDOT:PSS Films Inducing Strong Inversion Layers in Organic/Silicon Hybrid Heterojunction Solar Cells

Structural Design and Simple Posttreatment of the Hole Transport Layer to Improve Performance of Hybrid Solar Cells

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Performance-Enhancing Approaches for PEDOT:PSS-Si Hybrid Solar Cells

Improving Open-Circuit Voltage and Short-Circuit Current of High- Efficiency Silicon-Based Planar Heterojunction Solar Cells by Combining V2O5 with PEDOT:PSS

PEDOT:PSS‐Metal Oxide Composite Electrode with Regulated Wettability and Work Function for High‐Performance Inverted Perovskite Solar Cells