Abstract:Silicon-organic solar cells based on conjugated polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on n type silicon (n-Si) attract wide interest because of their potential for cost-effectiveness and high-efficiency. However, a lower barrier height Phi(b) and a shallow built in potential (V-bi) of Schottky junction between n-Si and PEDOT:PSS hinders the power conversion efficiency (PCE) in comparison with those of traditional p-n junction. Here, a strong inversion layer was formed on n Si surface by inserting a layer of 1, 4, 5, 8, 9, 11-hexaazatriphenylene hexacarbonitrile (HAT-CN), resulting in a quasi p-n junction. External quantum efficiency spectra, capacitance-voltage, transient photovoltage decay and minority charge carriers life mapping measurements indicated that a quasi p-n junction was built due to the strong inversion effect, resulting in a high Phi(b) and V-bi. The quasi p-n junction located on the front surface region of silicon substrates improved the short wavelength light conversion into photocurrent. In addition, a derivative perylene diimide (PDIN) layer between rear side of silicon and aluminum cathodes was used to block the holes from flowing to cathodes. As a result, the device with PDIN layer also improved photoresponse at longer wavelength. A champion PCE of 14.14% was achieved for the nanostructured silicon-organic device by combining HAT-CN and PDIN layers. The low temperature and simple device structure with quasi p-n junction promises cost-effective high performance photovoltaic techniques.

Highly Conductive and Wettable PEDOT:PSS for Simple and Efficient Organic/c‐Si Planar Heterojunction Solar Cells

Simple Solvent Treatment Enabled Improved PEDOT:PSS Performance Toward Highly Efficient Binary Organic Solar Cells

High-Efficiency Silicon/Organic Heterojunction Solar Cells with Improved Junction Quality and Interface Passivation

High Conductivity PEDOT:PSS Thin Films Affording Improved Open Circuit Voltages in PEDOT:PSS-Si Heterojunction Solar Cells

Interfacial Band Engineering of Highly Efficient PEDOT:PSS/p‐Si/ZnO Heterojunction Solar Cells

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Over 16.7% Efficiency Organic‐Silicon Heterojunction Solar Cells with Solution‐Processed Dopant‐Free Contacts for Both Polarities

Efficient Planar Hybrid N-Si/pedot:Pss Solar Cells with Power Conversion Efficiency Up to 13.31% Achieved by Controlling the SiOx Interlayer

Fabrication of an Efficient Planar Organic-Silicon Hybrid Solar Cell with a 150 Nm Thick Film of PEDOT: PSS

Double-Layered PEDOT:PSS Films Inducing Strong Inversion Layers in Organic/Silicon Hybrid Heterojunction Solar Cells

Solution Processed Organic/Silicon Nanowires Hybrid Heterojunction Solar Cells Using Organosilane Incorporated Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) as Hole Transport Layers.

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Planar Organic‐Si Hybrid Solar Cell with MoO x Mixed PEDOT:PSS as Hole Injection Layer Profits from Mo 5+ and Mo 6+ Synergistic Effects

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer via the Introduction of ITO Nanoparticles and Its Application in Crystalline Silicon/Organic Heterojunction Solar Cells

Planar Organic‐Si Hybrid Solar Cell with MoOx Mixed PEDOT:PSS As Hole Injection Layer Profits from Mo5+ and Mo6+ Synergistic Effects

Buried MoOx/Ag Electrode Enables High-Efficiency Organic/Silicon Heterojunction Solar Cells with a High Fill Factor

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Efficient Crystalline Si/Organic Hybrid Heterojunction Solar Cells

Unrevealing Charge Carrier Selective Layer In Silicon Heterojunction Solar Cells Via Multifunctional Atomic Force Probes

Efficient Organic-Inorganic Hybrid Schottky Solar Cell: the Role of Built-In Potential