Abstract:The solid-state pH electrode has the potential possibility to be used in many extreme situations with satisfactory accuracy and low cost. But its performance is affected by the solid electrolyte, preparation process, and the structure of the sensitive membrane, etc. In this work, the relationships between these factors and the characteristic of the prepared electrode were verified by controlling the preparation conditions with a variety of electrochemical methods. Firstly, the solid electrolyte poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) was electrochemically deposited on the screen-printed carbon electrode (SPCE) substrate by a potentiostatic method in an aqueous solution containing 0.01 M 3,4-ethylenedioxythiophene (EDOT) and 0.1 M polystyrene sulfonic (PSS) acid as the supporting electrolyte. The PEDOT films were then characterized by cyclic voltammetry (CV) in the 0.1 M NaNO3 aqueous solution in order to obtain the optimized polymerization potential and charges where the PEDOT film would have a higher redox capacitance. Finally, the pH electrode was prepared by coating the SPCE/PEDOT(PSS) with a plasticized polyvinyl chloride (PVC) membrane containing tridodecylamine as hydrogen ionophore manually, and experiments were carried out to study the effect of the usage of PVC per square millimeter on the response time and stability of the electrode to optimize the PVC film thickness. The potentiometric response of the pH electrode was studied in the buffer solutions with pH ranging from 5.00 to 10.81 by the open-circuit potential (OCP) method. Experimental results show that the sensitivity of the electrode is -55.7 +/- 0.5 mV pH(-1) (r(2) > 0.9980) at room temperature (24 +/- 1 degrees C) with pH ranging from 2.00-10.50, approximating to the theoretical nernstian slope (-59.16 mV pH(-1)), and the response time was less than 10 s. Moreover, it has low impedance, high accuracy and potential stability as well as some other useful properties such as pressure and heat resistance, hydrofluoric acid resistance, and it is not as fragile as the glass electrode.

Porous three-dimensional poly(3,4-ethylenedioxythiophene)/K<sub>3</sub>Fe(CN)<sub>6</sub> network as the solid contact layer in high stability Pb<SUP>2+</SUP> ion-selective electrodes

Stable Ion-Selective Electrode Based on Screen Printed Electrode for the Pb 2+ Detection Using Hierarchical Polypyrrole-Cupct Nanowires As the Solid Contact

Stable Pb2+ Ion-Selective Electrodes Based on Polyaniline-Tio2 Solid Contacts.

A Solid-Contact Pb2+-selective Electrode Based on a Hydrophobic Polyaniline Microfiber Film As the Ion-to-electron Transducer

Improving the Stability of Pb2+ Ion-Selective Electrodes by Using 3D Polyaniline Nanowire Arrays As the Inner Solid-Contact Transducer

Potential Stability Improvement in Solid-Contact Pb2+ion-selective Electrodes by Using Polyaniline/montmorillonite Composites As the Ion-to- Electron Transducer

Potential Stability Improvement in Pb2+ Ion Selective Electrodes by Applying Hydrophobic Polyaniline As Ion-to-electron Transducer

Beryllium-Ion-Selective PEDOT Solid Contact Electrode Based on 9,10-Dinitrobenzo-9-Crown-3-Ether

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

A cathodically polarized PANI-based lead ion-selective electrode: achieving high stability with antibiofouling capabilities

Achieving Preeminent Stability and Reproducibility in an Ion-Selective Electrode for Copper Ion Via Introducing a Hydrophobic NiCo2S4/PFOA Solid-Contact

A Stable and Low-Fouling Lead Ion-Selective Electrode Employing Polyaniline-MXene Composite for Solid Contact and Polypeptide for Antifouling

Fabrication of Lead Ion Selective Electrodes (Pb-ISE) based on Poly Methyl-Methacrylate-Co-Butyl Acrylate (MB28) Thin Film Photo-polymers and Pencil Graphite Electrodes (PGEs)

Lead Ion-Selective Electrodes Based on Polyphenylenediamine As Unique Solid Ionophores

Electroactive Poly(thionine) As Imprinted Polymer and Reference Probe Simultaneously for Ratiometric Ion Imprinted Electrochemical Pb2+sensor.

Study on the Performance of All-Solid-state Copper Ion Selective Electrode Based on PEDOT/PSS

A Solid-Contact Ph-Selective Electrode Based on Tridodecylamine As Hydrogen Neutral Ionophore

Coulometric Response of H+-Selective Solid-Contact Ion-Selective Electrodes and Its Application in Flexible Sensors

Solid-contact polymeric membrane ion-selective electrodes using a covalent organic framework@reduced graphene oxide composite as ion-to-electron transducer

Facile Synthesis of ZIF-8@poly(3,4-ethylenedioxythiophene):poly (4-Styrenesulfonate) and Its Application As Efficient Electrochemical Sensor for the Determination Dichlorophenol