Abstract:Fabricating an ion-to-electron transducer (IET) from waste in the solid contact screen-printed ion-selective electrodes (SC-SP-ISEs) technique is challenging because its properties determine the potential stability and reproducibility of the designed sensors. Herein, we fabricated an IET substrate from recyclable wastes, and we applied it as an IET layer in an ISE-based sensor for fast and on-site detection of lead ions (Pb2+) in an environmental sample. First, MIL-101(Cr) was prepared based on a combination of PET and Cr+6 waste recycling (R-MIL-101(Cr)). Polyaniline (PANI) was polymerized over R-MIL-101(Cr) to prepare a conductive PANI@R-MIL-101(Cr) composite. Then, it was applied as an IET substrate in the construction of pb2+-ISE for the detection of Pb2+ ions in sediment samples collected from Lake Idku, Egypt. Three Pb2+ sensors were fabricated and abbreviated as sensors I, II, and III corresponded to PANI, R-MIL-101(Cr), and PANI@R-MIL-101(Cr) as IET substrates, respectively. The performance of the sensors was studied to be applied for fast and selective detection of Pb2+ at low concentration levels. Among the fabricated sensors, PANI@R-MIL-101(Cr) shows fast response (5 sec), low detection limit (1 × 10−7 mol/L), and long lifetime reaches 70 days with a potential drift of 0.9 mV h−1. The electrochemical characteristics prove the fast ion-to-electron transportation in the case of PANI@R-MIL-101(Cr) owing to its lower impedance and high capacitance. In-situ polymerization of PANI significantly enhanced the conductivity of the PANI@R-MIL-101(Cr) composite. The hydrophobic nature of PANI@R-MIL-101(Cr) ensures high stability by preventing the formation of water layers at the electrode/membrane interface. These results show the great potential of the IET-based PANI@R-MIL-101(Cr) layer for Pb2 + sensing in environmental samples with low detection limits and high stability for the future development of SC-ISEs.

Stable Ion-Selective Electrode Based on Screen Printed Electrode for the Pb 2+ Detection Using Hierarchical Polypyrrole-Cupct Nanowires As the Solid Contact

Solid-contact Ion-Selective Electrodes for Potentiometric Determination of Phenylethylamine in Vitro

Porous three-dimensional poly(3,4-ethylenedioxythiophene)/K<sub>3</sub>Fe(CN)<sub>6</sub> network as the solid contact layer in high stability Pb<SUP>2+</SUP> ion-selective electrodes

Lead Ion-Selective Electrodes Based on Polyphenylenediamine As Unique Solid Ionophores

Improving the Stability of Pb2+ Ion-Selective Electrodes by Using 3D Polyaniline Nanowire Arrays As the Inner Solid-Contact Transducer

Potential Stability Improvement in Solid-Contact Pb2+ion-selective Electrodes by Using Polyaniline/montmorillonite Composites As the Ion-to- Electron Transducer

Stable Pb2+ Ion-Selective Electrodes Based on Polyaniline-Tio2 Solid Contacts.

A Solid-Contact Pb2+-selective Electrode Based on a Hydrophobic Polyaniline Microfiber Film As the Ion-to-electron Transducer

Achieving Preeminent Stability and Reproducibility in an Ion-Selective Electrode for Copper Ion Via Introducing a Hydrophobic NiCo2S4/PFOA Solid-Contact

Ultrasensitive Pb(II) Potentiometric Sensor Based on Copolyaniline Nanoparticles in a Plasticizer-Free Membrane with a Long Lifetime

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Electroactive Poly(thionine) As Imprinted Polymer and Reference Probe Simultaneously for Ratiometric Ion Imprinted Electrochemical Pb2+sensor.

A Stable and Low-Fouling Lead Ion-Selective Electrode Employing Polyaniline-MXene Composite for Solid Contact and Polypeptide for Antifouling

Disposable Electrochemical Aptasensor with Mesoporous Carbon Spheres Modified Screen-Printed Dual-Working Electrodes for Pb2+ and Hg2+ Detection

Cost-effective synthesis of MIL-101(Cr) from recyclable wastes and composite with polyaniline as an ion-to-electron transducer for potentiometric Pb2+ sensing

Lead-Ion Potentiometric Sensor Based on Electrically Conducting Microparticles of Sulfonic Phenylenediamine Copolymer

Potential Stability Improvement in Pb2+ Ion Selective Electrodes by Applying Hydrophobic Polyaniline As Ion-to-electron Transducer

Hollow mushroom nanomaterials for potentiometric sensing of Pb 2+ ions in water via the intercalation of iodide ions into the polypyrrole matrix

A General Approach to One-Step Fabrication of Single-Piece Nanocomposite Membrane Based Pb2+-selective Electrodes

A Disposable Electrochemical Sensor for Lead Ion Detection Based on In Situ Polymerization of Conductive Polypyrrole Coating

Highly selective and sensitive Pb 2+ detection via sulfur-doped graphitic carbon nitride modified by Bi nanospheres