Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Facile Synthesis of ZIF-8@poly(3,4-ethylenedioxythiophene):poly (4-Styrenesulfonate) and Its Application As Efficient Electrochemical Sensor for the Determination Dichlorophenol

In-situ Synthesis of Hierarchically Porous Polypyrrole@zif-8/Graphene Aerogels for Enhanced Electrochemical Sensing of 2, 2-Methylenebis (4-Chlorophenol)

Three-dimensional PEDOT Composite Based Electrochemical Sensor for Sensitive Detection of Chlorophenol

Highly Water-Stable Pedot:Pss Composite Electrode Decorated With Polyvinylpyrrolidone And Carbon Nanotubes For Sensitive Detection Of Eugenol

Enhancing Electrochemical Properties of a Two-Dimensional Zeolitic Imidazole Framework by Incorporating a Conductive Polymer for Dopamine Detection.

Synthesis And Characterization Of Pedot Derivative With Carboxyl Group And Its Chemo Sensing Application As Enhanced Optical Materials

A Novel Electrochemical Sensor for Chlorophenols Based on the Enhancement Effect of Al-doped Mesoporous Cellular Foam

Cost-effective preparation and sensing application of conducting polymer PEDOT/ionic liquid nanocomposite with excellent electrochemical properties

Synthesis of Poly(sodium 4-Styrenesulfonate) Functionalized Graphene/cetyltrimethylammonium Bromide (CTAB) Nanocomposite and Its Application in Electrochemical Oxidation of 2,4-Dichlorophenol

A Highly Sensitive and Selective Electrochemical Sensor Based on Polydopamine Functionalized Graphene and Molecularly Imprinted Polymer for the 2,4-Dichlorophenol Recognition and Detection.

High Performance Electrochemical Electrode Based on Polymeric Composite Film for Sensing of Dopamine and Catechol

Application of PEDOT:PSS and Its Composites in Electrochemical and Electronic Chemosensors

Poly 3,4-Ethylenedioxythiophene and Zirconia Nanoparticles Composite Modified Sensor for Methyl Parathion Determination

One-Step Electropolymerization of Polythiophene Derivative Film for Photoelectrochemical Detection of Chlorpyrifos

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

A Highly Selective Electrochemical Sensor for 4-Chlorophenol Determination Based on Molecularly Imprinted Polymer and PDDA-functionalized Graphene

A simple strategy to fabricate high sensitive 2,4-dichlorophenol electrochemical sensor based on metal organic framework Cu3(BTC)2

Synergetic catalysis of ligand connecting MOFs@MOFs composites in electrochemical detection of P-Chlorophenols

Polymerization of PEDOT/PSS/Chitosan-Coated Electrodes for Electrochemical Bio-Sensing

Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) composite electrode as sensing platform for the simultaneous electrochemical determination of dihydroxybenzene isomers

Synthesis and Electrochemical Sensing Application of Poly(3,4-Ethylenedioxythiophene)-based Materials: A Review