Abstract:Polymeric membrane sensors based on molecular imprinted polymers (MIPs) have been attractive analytical tools for detecting organic species. However, the MIPs in electrochemical sensors developed so far are usually prepared by in situ polymerization of pre-polymers and non-covalent adsorption on the surface of the working electrode. Meanwhile, the MIPs in the electrochemical sensors developed are typically made of a non-conductive polymer film. This results in a relatively low current due to the lack of electron transfer. Additionally, the smoothness of the traditional electrochemical substrate results in a low specific surface area, which reduces the sensitivity of the electrochemical sensor. Here, we describe a novel electrochemical sensor with a conductive interface and MIPs modification. The electrochemical sensor was modified by covalent coupled layer by layer self-assembly with the imprinted polymer film. The incorporation of these two conductive functional materials improves the conductivity of the electrodes and provides interface support materials to obtain high specific surface area. By using 2,4,6-trichlorophenol as the model, the sensitivity of the developed conductive sensor was greatly improved compared to that of the traditional MIPs sensor. We believe that the proposed MIPs-based sensing strategy provides a general and convenient method for making sensitive and selective electrochemical sensors.

What problem does this paper attempt to address?

The problems that this paper attempts to solve lie in several key challenges existing in traditional molecularly imprinted polymers (MIPs) electrochemical sensors when detecting organic substances: 1. **Insufficient Conductivity**: Traditional MIPs are usually prepared by non - covalent adsorption on the surface of the working electrode and are usually composed of non - conductive polymer films, which results in a lower current due to the lack of an effective electron transfer path. 2. **Low Specific Surface Area**: The smooth surface of the traditional electrochemical substrate leads to a low specific surface area, thereby reducing the sensitivity of the electrochemical sensor. 3. **Poor Stability**: The MIPs film formed on the electrode surface by in - situ polymerization has a weak adhesion to the electrode surface due to the inhomogeneity of the liquid - solid interface and is easily detached from the sensor surface during use or when removing the template molecule, resulting in a short service life of the sensor and poor experimental repeatability. To overcome these challenges, the paper proposes a new type of electrochemical sensor with a conductive interface and MIPs modification. Specifically, the MIPs film is in - situ polymerized and covalently fixed on the surface of the working electrode by the covalent - coupling layer - by - layer self - assembly method. This method not only improves the conductivity of the electrode but also provides a support material with a high specific surface area, thereby significantly improving the detection sensitivity of the sensor for 2,4,6 - trichlorophenol (2,4,6 - TCP). The main innovation points of the paper include: - **Covalent - coupling Layer - by - Layer Self - Assembly**: The MIPs film is fixed on the electrode surface by covalent bonds, which improves the stability of the film and the reusability of the sensor. - **Combination of Conductive Functional Materials**: Graphene and gold - flower - like structures (Au - F) are introduced to improve the conductivity and specific surface area of the electrode. - **High Sensitivity**: Through the above improvements, the detection sensitivity of the sensor for 2,4,6 - TCP is significantly improved, and the detection limit is as low as 0.0067 mM. In conclusion, this paper aims to develop a highly sensitive and highly stable electrochemical sensor for detecting organic pollutants in the environment, especially 2,4,6 - trichlorophenol.

Conductive imprinted polymeric interfacially modified electrochemical sensors based on covalently bonded layer-by-layer assembly of Gr/Au with flower-like morphology for sensitive detection of 2,4,6-TCP

Nanochannel Array Modified Three-Dimensional Graphene Electrode for Sensitive Electrochemical Detection of 2,4,6-Trichlorophenol and Prochloraz.

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

AgNPs–PDA–GR nanocomposites-based molecularly imprinted electrochemical sensor for highly recognition of 2,4,6-trichlorophenol

Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Synthesis and characterization of sensitive molecularly imprinting electrochemical sensor based on chitosan modified aminoated hierarchical porous silica-supported gold for detection of 2, 4-dichlorophenoxyacetic acid

Synthesis and Characterization of Sensitive Molecular Imprinting Electrochemical Sensor Based on Chitosan Modified HPSNS-NH2@Au for Detection of 2,4-D

A sensitive electrochemical sensor modified with multi-walled carbon nanotubes doped molecularly imprinted silica nanospheres for detecting chlorpyrifos.

Controlled Synthesis of Conjugated Microporous Polymer Films: Versatile Platforms for Highly Sensitive and Label‐Free Chemo‐ and Biosensing

A highly sensitive electrochemical sensor based on surface molecularly imprinted polymers and graphene carbon nanotubes for highly selective detection of chlorpyrifos

Novel Electrochemical Sensor Based on Molecularly Imprinted Polymers with MWCNTs-SiO2 for Selective and Sensitive Detecting 2,4-D

Synthesis of organic phosphoric acid-based multilayer SERS imprinted sensor for selective detection of dichlorophenol

Detection of tetracycline by molecularly imprinted electrochemical sensor based on the modification of poly(3,4-propylene dioxythiophene)/chitosan/au

Preparation of molecularly imprinted polymers for sensing of 2,4-dichlorophenoxyacetic acid residues in environmental water and mixed juice

Molecularly imprinted polymer photoelectrochemical sensor for the detection of triazophos in water based on carbon quantum dot-modified titanium dioxide

Developing a generally applicable electrochemical sensor for detecting macrolides in water with thiophene-based molecularly imprinted polymers

In-situ Synthesis of Hierarchically Porous Polypyrrole@zif-8/Graphene Aerogels for Enhanced Electrochemical Sensing of 2, 2-Methylenebis (4-Chlorophenol)

Sensitive determination of pesticide imidacloprid using a glassy carbon electrode modified with a film composed of multi-walled carbon nanotubes and poly(aspartic acid)

A molecularly imprinted copolymer based electrochemical sensor for the highly sensitive detection of L-Tryptophan

Controllable synthesis of conjugated microporous polymer films for ultrasensitive detection of chemical warfare agents

A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection