Abstract:In order to further improve the linear datum based geometric measurement accuracy and expand the measurement range, a 6-DoF motion system is developed for realizing a linear datum in the form of motion trajectory of the contact point (CP) of an absolute displacement measurement probe. This linear datum is established based on the concept of coordinate measurement and it does not contain straightness error in theory. The 6-DoF motion system consists of a 6-DoF fine stage and a 1-DoF coarse stage. The probe is moved by the 6-DoF fine stage which is magnetically noncontact supported and parallelly noncontact actuated. A CP-centred 6-DoF metrology model and a CP-centred 6-DoF motion model are established for elimination of Abbe error and on-line compensation of motion error of CP, respectively. 1-DoF coarse stage is controlled with relative position between two stages to extend the limited motion range of 6-DoF fine stage along the linear datum. Effectiveness of the metrology and motion models is verified through experiment. Straightness error of a 91.5 mm long line of an optical flat is measured by the proposed system and a commercial Fizeau interferometer. Comparison shows a consistency with standard deviation of 11 nm. Another experiment indicates that the proposed system could be used to realize a linear datum within a range of 220 mm with a repeatability of standard deviation of 7 nm.

Accuracy improvement of linear stages using on-machine geometric error measurement system and error transformation model

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Novel Enhancing Resolution Method for Measurement Straightness Error

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Positioning accuracy improvement method of industrial robot based on laser tracking measurement

A Method for Simultaneously Measuring 6DOF Geometric Motion Errors of a Precision Rotary Stage Based on Absolute Position-Distance Measurement

Measurement of four-degree-of-freedom geometric errors of a linear stage based on telescope system

Error Analysis and Compensation of a Laser Measurement System for Simultaneously Measuring Five-Degree-of-Freedom Error Motions of Linear Stages

Measurement of six-degree-of-freedom geometric errors of a translation stage using three absolute position encoders

Crosstalk Decoupling Measurement Method to Determine the Six Degrees of Freedom of Motion Error of Linear Stages

An Embedded Sensor System for Real-Time Detecting 5-DOF Error Motions of Rotary Stages

Development of a 6-Dof Motion System for Realizing a Linear Datum for Geometric Measurements.

Measuring geometrical errors of linear axis of machine tools based on the laser tracker

A Geometric and Kinematic Error Model and Compensation of a 6-Axis Motorized Optical Fiber Alignment Stage

Construction of a Robust Three-Degree-of- Freedom Laser Measurement System for Measuring Motion Error of Long-Travel Linear Stages

The Research on Geometric Error’s Tolerance Design of X–Y Stage’s Measurement System Accuracy

An Algorithm on Laser Measurement Model of Ultra-precision Motion Stage and Error Compensation

Dynamic error analysis for six degrees of freedom micro-displacement mechanism in reticle stage of lithography machine