Abstract:Mobile robotic drilling for flight control surface assembly at multiple stations demands high positioning accuracy of the equipped industrial robot. However, disturbances, arising from movement from station to station, significantly deteriorate the positioning accuracy. This paper proposes a novel in-process robot base frame calibration method with a 2D vision system. A proposal layout of flight control surface assembly, the developed mobile robotic drilling system, and the 2D vision system are first introduced. Then an iterative measurement scheme is proposed to eliminate measurement errors induced by non-perpendicularity and erroneous object distance during 2D vision-based positioning of preset reference holes. In order to obtain the third-dimension Cartesian coordinates of the reference holes, depth control with autofocus is achieved by using a new sharpness function. Based on the acquired Cartesian coordinates of the reference holes in the robot base frame, and their counterparts measured in advance in the world coordinate system, the description of the robot base frame with respect to the world coordinate system can be obtained with least-squares fitting. Numerical experiments show that depth control with autofocus contributes to enhanced accuracy of robot base frame calibration. Experiments performed on the developed mobile drilling system indicate that the maximum positioning error is about 0.6 mm with the proposed calibration method. Since position errors of drilled fastener holes will be further measured and compensated for based on the 2D vision system, the proposed in-process robot base frame calibration method is effective.

Measurement of six-degree-of-freedom geometric errors of a translation stage using three absolute position encoders

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

Uncertainty analysis of a six-degree-of-freedom surface encoder for a planar motion stage

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Pose Error Compensation Based on Joint Space Division for 6-DOF Robot Manipulators

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Pose Alignment of Aircraft Structures with Distance Sensors and CCD Cameras

A New 6-Degree-of-freedom Measurement Method of X-Y Stages Based on Additional Information

Crosstalk Decoupling Measurement Method to Determine the Six Degrees of Freedom of Motion Error of Linear Stages

Position and Out-Of-Straightness Measurement of A Precision Linear Air-Bearing Stage by Using A Two-Degree-Of-Freedom Linear Encoder

Measurement Uncertainty Evaluation of the Three Degree of Freedom Surface Encoder

Measurement of Six-Degree-Of-Freedom Planar Motions by Using A Multiprobe Surface Encoder

Full-scale Measurement of CNC Machine Tools

Design and Construction of a Two-Degree-of-freedom Linear Encoder for Nanometric Measurement of Stage Position and Straightness

3-D Passive Scale Tracking Method for Measuring Motion Errors of Industrial Robots

The Research on Geometric Error’s Tolerance Design of X–Y Stage’s Measurement System Accuracy