Abstract:DIW printing process of SiO2/PEI composites and effect of printing parameters on their mechanical properties. Direct‐ink writing (DIW) 3D printing technology has the advantages of simple process and high efficiency, and enables the molding of materials at room temperature. These characteristics make DIW technology widely applicable in the field of monolithic molding. In this study, a composite slurry of SiO2 and polyethyleneimine (PEI) was molded using direct‐ink writing 3D printing technology. Fourier transform infrared spectroscopy, x‐ray diffraction, and thermogravimetric were used to analyze the structure and thermal characteristics of the composites. Additionally, the study investigated the extrusion flow under different pressures and the impact of ink formula on their rheological behavior and printability, along with an examination of the effects of printing parameters on the mechanical properties of the monolithic structures. The results indicate that the tensile strength of the dumbbell‐shaped specimen increases with greater sample density and reduced nozzle diameter. At a filling angle of ±45°, the void rate is minimal, and the tensile strength reaches a maximum of 1.73 MPa. The tensile strength is maximum when the nozzle diameter is 0.8 mm. On the other hand, the compressive strength of the specimen is directly proportional to the layer thickness – it increases upon reducing the layer thickness. When the layer thickness is 0.3 mm, the compressive strength reaches 0.13 MPa. This study provides insights into direct‐ink writing 3D printing technology and its relationship with the mechanical properties of SiO2/PEI composites monolithic structures. Highlights Self‐standing fumed silica/polyethyleneimine (PEI) composite monoliths were shaped by Direct Ink Writing (DIW) technology. The impact of composite slurry composition on their rheological behavior and printability was examined. Printing parameters effects on mechanical properties of monolithic structures assessed. Significant insights into the relationship between extrusion pressure and forming structure of the composite monoliths are revealed by our research, thereby contributing to the optimization of printing processes.

Preparation and Mechanical Performance of SiCw/geopolymer Composites Through Direct Ink Writing

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties

Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Effect of 3D printing process parameters on the mechanical properties of silica/polyethyleneimine composites using direct‐ink writing

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC composites

Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration

Rheology and Printability of a Porcelain Clay Paste for DIW 3D Printing of Ceramics with Complex Geometric Structures

Silicon carbide whiskers reinforced SiOC ceramics through digital light processing 3D printing technology

Binder jetting additive manufacturing of hierarchical structural SiC w /SiC composites

3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions

Microstructure, thermal, and mechanical properties of hierarchical porous silicon carbide made by direct ink writing

Slurry material extrusion of chopped carbon fiber reinforced silicon carbide ceramic matrix composites (CMCs)

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

Microstructure control of SiCw/SiC composites based on SLS technology