Abstract:Coherent cuboidal precipitation of γ′ (Ni3Al) phases can significantly improve the high temperature properties of Cu–Ni–Al alloys, in which, substantial γ′ phases and a suitable lattice misfit degree between γ (Cu matrix) and γ′ phase (δγ-γ′) is necessary. However, the re-dissolution and grain boundary discontinuous precipitation would induce the degradation of heating resistance in the alloys with higher Cu content. Herein introducing Si with strong elemental interaction to resolve this issue. In this research, series of Cu85.71Ni10.72-x Al3.57Six (x = 0, 0.45, 0.89, 1.34 and 1.79) alloys are designed and prepared, and the effect of Si addition on microstructure, properties at room or high temperature are investigated. The results demonstrate that Si with completely solution state has an effect on the promoting of γ′ precipitation and suppression of the discontinuous precipitation. Meanwhile, Si addition regulates the δγ-γ′, transforming the shape of γ′ phases from spherical to cuboidal and delaying the re-dissolution of γ′ phase and improving the stability of matrix. First-principles calculations and work function results indicate that Gibbs free energy ΔG of γ′ phase decreases as well as exhibiting a more negative cohesive energy Eb for a suitable Si addition, which enables the alloys to be more stable and homogeneous. Si exhibits a good optimization effect for Cu–Ni–Al–Si alloy, which leads to excellent high temperature properties that can be extended to alloys with higher Cu content by Si addition. Therefore, multi-componentization is an efficient way to improve the properties of Cu–Ni–Al alloys, and an appropriate match in elemental interaction is crucial. The research provides theoretical and experimental basis for the development of heat-resistant Cu alloy with good comprehensive properties.

Alloying Effect on the Stability of Ti5Si3 from First‐Principles Study

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

Formation Mechanism and Effect on the Mechanical Properties of TiSi Phase for Ti-5Al-5Mo-5Cr-3Nb-2Zr Alloyed by Silicon

Stoichiometric and Off-Stoichiometric Alloying in Silicide Compound Ti5Si3 by Nb or Cr Additions

Effects of Alloying Elements on the Stability of TiO2 and Their Diffusion Properties Studied by First Principles Calculations

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Influence of Α+β Solution Treatments on Ti65 Ultrathin Sheets: Silicide Precipitation, Mechanical Behaviour and Novel{101¯1}twinning System

The influence of Si alloying on the crept microstructure and property of a TiAl alloy prepared by powder metallurgy

Thermodynamic Effect of Alloying Addition on In-Situ Reinforced TiB 2 /al Composites

Formation Mechanism of Tisi Phase and Silicide Kinds on Microstructure and Mechanical Properties for Ti-5al-5mo-5cr-3nb-2zr Alloyed by Silicon

Influence of Ti Elements on the Evolution of Microstructure, Mechanical Properties and Thermal Stability of Al-Cu Alloy

Theoretical Study of the Effects of Alloying Elements on TiO2/Ti2AlNb Interface Adhesion Properties.

Influence of α+β solution treatments on Ti65 ultrathin sheets: Silicide precipitation, mechanical behaviour and novel { 10 1 ̄ 1 } twinning system

Influence of plus solution treatments on Ti65 ultrathin sheets: Silicide precipitation, mechanical behaviour and novel {1011} twinning system

The Role of In-Situ Al3Ti Formed During Solidification in Improving the High-Temperature Properties of Al-Cu Alloy

Influence of Alloying Elements on Stability and Adhesion Ability of TiAl/TiO2 Interface by First-Principles Calculations

Stoichiometric and off-stoichiometric alloying in ti5si3 by nb or cr addition

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

The Influence of Zr Content on Microstructure and Precipitation of Silicide in As-Cast Near Α Titanium Alloys