Abstract:Aiming to obtain a martensite-free microstructure of Ti–Zr alloys with a combination of enhanced deformability and improved mechanical properties for dental application, two high Zr-containing Ti-based alloys were prepared with commercially pure titanium as a control. The effects of Zr addition on the deformation mechanism, microstructure and mechanical properties were investigated. After thermo-mechanical processing and cold deformation, samples were characterized using Vickers microhardness, tensile tests, X-ray diffraction (XRD) scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD and TEM examinations revealed that the increasing Zr addition suppressed the deformation twining and favored the deformation-induced face-centered cubic (FCC) phase, the corresponding reason was discussed. There is a competition between the deformation twin and FCC phase. The two types of FCC phase were simultaneously found with orientation relationships (ORs) of Basal-type: <11–20>HCP//<110>FCC and {0001}HCP//{111}FCC and Prismatic-type: <0001>HCP//<001>FCC and {10-10}HCP//{110}FCC. This phase transformation enhanced the deformability during processing. As the Zr addition increased, the microhardness, mechanical strength and plasticity are increased concurrently. The interactions of twins were found to cause brittle fracture of Ti20Zr alloy. Based on the texture analysis, the activated slip systems of FCC phase were determined via calculating the Schmid factor. The FCC phase not only provided additional slip systems but also impeded dislocation slip effectively, improving the strength-plasticity of Ti30Zr alloy. The findings will provide a novel approach associated with the strengthening-toughening mechanism of metallic materials.

Lattice Stability and Elastic Properties of Zr-Ti-X Alloys (X = Al, V) by the First Principles Study

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

Effect of zr content on the microstructures and hydrogen storage properties of (Ti-Cr)(45-x)V55Zrx (x=1 similar to 7) alloys

Microstructure and mechanical properties of Ti-Al-V-Zr cast alloys with different Zr contents based on Ti-6Al-4V cluster formula

Effect of Zr Content on the Microstructures and Hydrogen Storage Properties of (Ti-Cr)_(45-x)V_(55)Zr_x(x=1～7) Alloys

Optimal Design of High-Strength Ti‒Al‒V‒Zr Alloys Through a Combinatorial Approach

Microstructure and Mechanical Properties of Ti-Zr-Cr Biomedical Alloys.

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

First-Principles Study of Structural Stability and Tensile Strengths of Light-Element-Doped ZrTi

Effect of Ti on the Structure and Mechanical Properties of TixZr2.5-xTa Alloys.

First-principles Investigation on Phase Stability and Elastic Properties of beta-Ti1-x-y-zNbxZrySnz Alloys

Theoretical Study On The Alloying Effect Of Cr, V In Ti-Al Alloys

Influence of Zr Content on Phase Transformation, Microstructure and Mechanical Properties of Ti75−xNb25Zrx (x = 0–6) Alloys

Stability of α Phase in Ti Alloys Containing Al or Zr from First-Principles Calculations

Effect of Zr Addition on Microstructures and Mechanical Properties of Ni-46Ti-4Al Alloy

Effect of Variation in Zr Content on Microstructure and High-Temperature Tensile Properties of a Γ-Tial Alloy

Density, Thermal Stability and Mechanical Properties of Zr-Ti-Al-Cu-Ni Bulk Amorphous Alloys with High Al Plus Ti Concentrations

Phase Stability And Hardness Of Some Ternary Ti-Zr Based Shape Memory Alloys

First-principles Calculations of Structural, Elastic and Electronic Properties of Second Phases and Solid Solutions in Ti–Al–V Alloys