Abstract:Starting with the initial design stage, the ship resistance constitutes one of the most important hydrodynamic aspects. In order to generate and optimize the body lines plan, the ship resistance performance must be considered. In this case, both numerical and experimental methods must be applied to obtain the minimum ship resistance controlled by the speed domain. In the last years, numerical studies based on the Computational Fluid Dynamic (CFD) were implemented in the initial ship design stage in order to analyse the free-surface flow and to predict the ship resistance. The numerical optimization process of the hull forms must be validated by means of the experimental model tests in the specific towing tanks. The constant evolution of the numerical and experimental methodologies can be noted. As a consequence, the accuracy level of the ship resistance prediction is increased; though, difficult numerical problems can occur in case of the unconventional hull forms. Taking into account this aspect, a complex numerical and experimental investigation of the ship resistance problem and free-surface topology was performed in the case of the DTMB surface combatant. A parallel numerical simulation was carried out by using the viscous flow solver ISIS–CFD of the software FINE TM /Marine provided by NUMECA. The solver is based on the finite volume method to build the spatial discretization of the transport equation to resolve the Reynolds-Averaged Navier Stokes (RANS) equation. Closure to turbulence is achieved by making use of the k-ω SST model, while the free-surface is captured through an air-water interface based on the Volume of Fluid (VOF) method. For the validation purpose, the tank conditions are reintroduced in the numerical model to account for any banking effect, especially for the high speed cases. Experimental model tests were performed in accordance with the ITTC standard procedures, while the extrapolation process to the full-scale was obtained by using an in-house code, based on the ITTC 57 method. The experimental results are compared through with some internationally recognized towing tank experiments that have been performed for a similar ship model, showing a good agreement. Also, the numerical results are validated against the experimental data and showed to be within a satisfactory congruence.

Study on the Effect of Marine Biofouling for the Ship Resistance

Research on the Hydrodynamic Performance of a Pentamaran in Calm Water and Regular Waves

Predicting the effect of biofouling on ship resistance using CFD

Study on the Resistance of a Large Pure Car Truck Carrier with Bulbous Bow and Transom Stern

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Investigation on Some Factors Effecting Ship Resistance Calculation with CFD Code FLUENT

Experimental assessment and numerical simulations of marine fouling effect on underwater sound absorption coatings

CFD analysis of the full-scale resistance of an oil tanker in presence of a mud–water interface

Research of release characteristics of ship attached fouling

Prediction of the impact of biofouling roughness on a full-scale planing boat performance using CFD

Data-driven approach to evaluate the impact of hull roughness on main engine load of river-sea ships

Investigation on the Effect of Container Configurations and Forecastle Fairings on Wind Resistance and Aerodynamic Performance of Large Container Ships

Discussion of Mesh Generation Method for Ship Resistance Calculation

Resistance Performance of a Ship in Model-Scaled Brash Ice Fields Using CFD and DEM Coupling Model

Investigating Fishing Vessel Hydrodynamics by Using EFD and CFD Tools, with Focus on Total Ship Resistance and Its Components

Marine fouling: Factors affecting biofouling and future perspectives

Preliminary Numerical Investigation of Effect of Interceptor on Ship Resistance

Numerical Investigation on the Cavity Behavior and Hydrodynamic Performance of a Planing Air Cavity Ship

Numerical and Experimental Investigation on the Free-surface Flow and Total Resistance of the DTMB Surface Combatant