Abstract:Starting with the initial design stage, the ship resistance constitutes one of the most important hydrodynamic aspects. In order to generate and optimize the body lines plan, the ship resistance performance must be considered. In this case, both numerical and experimental methods must be applied to obtain the minimum ship resistance controlled by the speed domain. In the last years, numerical studies based on the Computational Fluid Dynamic (CFD) were implemented in the initial ship design stage in order to analyse the free-surface flow and to predict the ship resistance. The numerical optimization process of the hull forms must be validated by means of the experimental model tests in the specific towing tanks. The constant evolution of the numerical and experimental methodologies can be noted. As a consequence, the accuracy level of the ship resistance prediction is increased; though, difficult numerical problems can occur in case of the unconventional hull forms. Taking into account this aspect, a complex numerical and experimental investigation of the ship resistance problem and free-surface topology was performed in the case of the DTMB surface combatant. A parallel numerical simulation was carried out by using the viscous flow solver ISIS–CFD of the software FINE TM /Marine provided by NUMECA. The solver is based on the finite volume method to build the spatial discretization of the transport equation to resolve the Reynolds-Averaged Navier Stokes (RANS) equation. Closure to turbulence is achieved by making use of the k-ω SST model, while the free-surface is captured through an air-water interface based on the Volume of Fluid (VOF) method. For the validation purpose, the tank conditions are reintroduced in the numerical model to account for any banking effect, especially for the high speed cases. Experimental model tests were performed in accordance with the ITTC standard procedures, while the extrapolation process to the full-scale was obtained by using an in-house code, based on the ITTC 57 method. The experimental results are compared through with some internationally recognized towing tank experiments that have been performed for a similar ship model, showing a good agreement. Also, the numerical results are validated against the experimental data and showed to be within a satisfactory congruence.

Investigating Fishing Vessel Hydrodynamics by Using EFD and CFD Tools, with Focus on Total Ship Resistance and Its Components

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Numerical and Experimental Investigation on the Free-surface Flow and Total Resistance of the DTMB Surface Combatant

Numerical Study of Viscous Wave-Making Resistance of Ship Navigation in Still Water

Planing Hull Hydrodynamic Performance Prediction Using LincoSim Virtual Towing Tank

Ship Optimization Design of the Resistance and Seakeeping Performance Based on CFD

A Numerical Study on the Resistance Prediction of a Medium Speed Craft

Hydrodynamic Performance Optimization of Ship Hull's Forebody

Research on Factors of a Flow Field Affecting Catamaran Resistance Calculation

Ship resistance when operating in floating ice floes: a combined CFD&DEM approach

Study on resistance prediction of fishery ship

A method for ship resistance prediction based on CFD computation

Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experiments

Investigation on Some Factors Effecting Ship Resistance Calculation with CFD Code FLUENT

A numerical study of resistance and viscous flow around typical benchmark surface ship hull

CFD Investigations of Ship Maneuvering in Waves Using naoe-FOAM-SJTU Solver

Uncertainty suppression methods for CFD/EFD resistance prediction of ship model

Numerical Simulation of Viscous Flows Around a Surface Combatant Model at Different Drift Angles Using Overset Grids

Numerical Analysis of Fluid Flow Around Ship Hulls Using STAR-CCM+ with Verification Results

Resistance Performance of a Ship in Model-Scaled Brash Ice Fields Using CFD and DEM Coupling Model

Predicting the effect of biofouling on ship resistance using CFD