Abstract:Lithium (Li) metal has been considered as a very promising anode material for next-generation batteries because of its low electronegativity (-3.04 V), low gravimetric density (0.53 g cc-1) and ultrahigh specific capacity (3860 mAh g-1). The recent simulations forecast that the rechargeable Li metal batteries (LMBs) coupled with the conventional transient metal oxide cathodes and the Li metal anode can deliver a high gravimetric energy density of up to 500 Wh kg-1.[1] However, major challenges including low Coulombic eﬃciency (CE), short cycle life, and safety concerns have plagued the practical applications of Li metal as anode in recharge batteries.[2] Here we present a simple approach to suppress dendritic Li metal growth by introducing a multifunctional Janus-faced separator. This separator is designed by coating metallic copper (Cu) thin film (CuTF) onto one side surface of conventional polyethylene (PE) membrane via simple sputtering technique. The CuTF of the obtained Janus separator (PE/CuTF) plays a crucial role of an additional conducting agent for facile Li metal deposition/stripping. Furthermore, its electrically conductive nature can guide the backside plating of Li metal and electrochemical Li metal merging, resulting in less dendritic Li metal deposition (Figure 1). The lifetime of Li metal anode is enhanced by preventing short circuit failures even under extensive Li metal deposition. LMBs with the PE/CuTF separator exhibit stable cycling performances and enhanced CE during extended cycles. Moreover, the CuTF coating can suppress the thermal shrinkage of the polymer separators and enable a current collector-less cell configuration for high energy density. K.G. Gallagher, S. Goebel, T. Greszler, M. Mathias, W. Oelerich, D. Eroglu, V. Srinivasan, Energy Environ. Sci. 7, 1555 (2014). Xu, J. Wang, F. Ding, X. Chen, E. Nasybulin, Y. Zhang, J.-G. Zhang, Energy Environ. Sci. 7, 513 (2014). Figure 1. Proposed working principle on Li dendrite suppression by using Janus-faced separator; (A) conventional PE separator and (B) Cu metal thin film (CuTF) coated Janus (PE/CuTF) separator. Figure 1

Bifunctional Composite Separator with Redistributor and Anion Absorber for Dendrites-Free and Fast-Charging Lithium Metal Batteries

Bifunctional composite separator with a solid-state-battery strategy for dendrite-free lithium metal batteries

Bifunctional Separators with High Transference Number and Uniform Ion Flux for Dendrite-Free Lithium Metal Batteries

Converting an O-vacancy-rich Oxide into a Multifunctional Separator Modifier for Long-Lifespan Lithium Metal Batteries

An ultrathin Zn-BDC MOF nanosheets functionalized polyacrylonitrile composite separator with anion immobilization and Li+ redistribution for dendrite-free Li metal battery

Functional Separators Regulating Ion Transport Enabled by Metal‐Organic Frameworks for Dendrite‐Free Lithium Metal Anodes

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

An Ion-Conductive Separator for High Safety Li Metal Batteries

A high strength hybrid separator with fast ionic conductor for dendrite-free lithium metal batteries

An Ion Redistributor for Dendrite-Free Lithium Metal Anodes

Separators Based on the Dynamic Tip‐Occupying Electrostatic Shield Effect for Dendrite‐Free Lithium‐Metal Batteries

Constructing an Anion-Braking Separator to Regulate Local Li+ Solvation Structure for Stabilizing Lithium Metal Batteries.

Anion Immobilization Enabled by Cation‐Selective Separators for Dendrite‐Free Lithium Metal Batteries

Oxygen vacancies with localized electrons direct a functionalized separator toward dendrite-free and high loading LiFePO4 for lithium metal batteries

Highly Active Depleting Agent of Lithium Enabled High-Rate and Long-Life Lithium Metal Batteries

Dendrite‐Free Lithium Metal Battery Enabled by Dendritic Mesoporous Silica Coated Separator

A Simple Metallic Coating on Separator for Lithium Dendrite Suppression

Recent Advances in Functionalized Separator for Dendrites‐free and Stable Lithium Metal Batteries

Multiple uniform lithium-ion transport channels in Li6.4La3Zr1.4Ta0.6O12/Ce(OH)3 modified polypropylene composite separator for high-performance lithium metal batteries

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Gel Electrolyte Modification Enables Planar Li Deposition and Fast Kinetics Toward High Energy Li Metal Batteries