Abstract:Lithium (Li) metal has been considered as a very promising anode material for next-generation batteries because of its low electronegativity (-3.04 V), low gravimetric density (0.53 g cc-1) and ultrahigh specific capacity (3860 mAh g-1). The recent simulations forecast that the rechargeable Li metal batteries (LMBs) coupled with the conventional transient metal oxide cathodes and the Li metal anode can deliver a high gravimetric energy density of up to 500 Wh kg-1.[1] However, major challenges including low Coulombic eﬃciency (CE), short cycle life, and safety concerns have plagued the practical applications of Li metal as anode in recharge batteries.[2] Here we present a simple approach to suppress dendritic Li metal growth by introducing a multifunctional Janus-faced separator. This separator is designed by coating metallic copper (Cu) thin film (CuTF) onto one side surface of conventional polyethylene (PE) membrane via simple sputtering technique. The CuTF of the obtained Janus separator (PE/CuTF) plays a crucial role of an additional conducting agent for facile Li metal deposition/stripping. Furthermore, its electrically conductive nature can guide the backside plating of Li metal and electrochemical Li metal merging, resulting in less dendritic Li metal deposition (Figure 1). The lifetime of Li metal anode is enhanced by preventing short circuit failures even under extensive Li metal deposition. LMBs with the PE/CuTF separator exhibit stable cycling performances and enhanced CE during extended cycles. Moreover, the CuTF coating can suppress the thermal shrinkage of the polymer separators and enable a current collector-less cell configuration for high energy density. K.G. Gallagher, S. Goebel, T. Greszler, M. Mathias, W. Oelerich, D. Eroglu, V. Srinivasan, Energy Environ. Sci. 7, 1555 (2014). Xu, J. Wang, F. Ding, X. Chen, E. Nasybulin, Y. Zhang, J.-G. Zhang, Energy Environ. Sci. 7, 513 (2014). Figure 1. Proposed working principle on Li dendrite suppression by using Janus-faced separator; (A) conventional PE separator and (B) Cu metal thin film (CuTF) coated Janus (PE/CuTF) separator. Figure 1

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator

A Simple Metallic Coating on Separator for Lithium Dendrite Suppression

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Dendrite‐Free Lithium Metal Battery Enabled by Dendritic Mesoporous Silica Coated Separator

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

Bifunctional Composite Separator with Redistributor and Anion Absorber for Dendrites-Free and Fast-Charging Lithium Metal Batteries

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Bifunctional composite separator with a solid-state-battery strategy for dendrite-free lithium metal batteries

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Converting an O-vacancy-rich Oxide into a Multifunctional Separator Modifier for Long-Lifespan Lithium Metal Batteries

Dual Structure-Material Design of Separators Toward Dendrite-Free Lithium Metal Anodes.

In‐Situ Constructing a Mixed‐Conductive Interfacial Protective Layer for Ultra‐Stable Lithium Metal Anodes

Garnet/polymer hybrid ion-conducting protective layer for stable lithium metal anode

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

Suppressing Local Dendrite Hotspots via Current Density Redistribution Using a Superlithiophilic Membrane for Stable Lithium Metal Anode

Lithium Zinc/Lithium Iodide Composite Modified Layer toward Highly Stable Lithium Metal Anodes

Suppressing Electrolyte-Lithium Metal Reactivity Via Li+-desolvation in Uniform Nano-Porous Separator

A hybrid polymer protective layer with uniform Li+ flux and self-adaption enabling dendrite-free Li metal anodes