Abstract:The inhomogeneous pore structure and lack of polar groups in lithium metal battery separators lead to uneven transport of Li + through the separator, the uneven flux of Li + , and eventually the formation of lithium dendrites. Therefore, to provide uniform Li + transport and inhibit the growth of lithium dendrites, a polydopamine-modified cellulose membrane (PDA-CM) was created by oxidative self-polymerizing dopamine and binding it to the surface and interface of the cellulose membrane through hydrogen bonds. The successful preparation of the PDA-CM separator by PDA-modified cellulose membrane by hydrogen bonds was proved by the FT-IR test. TGA, thermal shrinkage test, tensile strength test, FESEM, and porosity test results indicated that neither the PDA-CM nor the CM separators shrank at 160 °C, the PDA-CM separator also had better tensile strength (Stress = 31.1 MPa), and uniform pores (Porosity = 54.95 %) with homogeneous Li + flux. The polar functional groups (-NH- and -OH) in PDA improved the electrolyte uptake rate (Electrolyte uptake rate = 469.77 %), the electrolyte retention (Electrolyte retention = 409.04 %), and electrolyte wettability (Contact angle = 18.35°) of the separator and promoted the uniform distribution of Li + through the PDA-CM separator. In addition, the PDA-CM separator had better ionic conductivity (1.54 × 10 −3 S·cm −1 ) and lower impedance (849 Ω). The catechol on the PDA molecule created strong adhesion between the separator and the lithium metal, reduced the local tension on the surface of the lithium metal and inhibited dendrite growth. The lithium metal anode remained smooth after cycling. The lithium metal battery prepared by the PDA-CM separator showed decent cycle performance and remained a high capacity retention rate (90.48 %) after 100 cycles. This study provides a new solution for the modification of cellulose-based lithium metal battery separators, which can achieve uniform transmission of Li + , inhibit the growth of lithium dendrites, and improve battery performance.

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

A Lithium‐Affinitive Covalent Organic Polymer Network Functionalized Separator for Dendrite‐Free and High‐Durability Lithium–Sulfur Batteries under Harsh Conditions

Regulating Li ions transportation and deposition with Polydopamine/Polyethyleneimine Functional Separator for Superior Li Metal Battery

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Dendrite‐Free Lithium Metal Batteries Enabled by Coordination Chemistry in Polymer‐Ceramic Modified Separators

Inhibition of lithium dendrite growth in composite separator for semi-solid-state lithium metal batteries

Dendrite‐Free Lithium‐Metal Batteries Enabled by 2D Lithophilic Conjugated Polymer on Separator

Dendrite-free lithium anode achieved under lean-electrolyte condition through the modification of separators with F-functionalized Ti3C2 nanosheets

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Fullerene-Derivative C60-(OLi)n Modified Separators toward Stable Wide-Temperature Lithium Metal Batteries

Converting an O-vacancy-rich Oxide into a Multifunctional Separator Modifier for Long-Lifespan Lithium Metal Batteries

Artificial Single-Ion Conducting Polymer Solid Electrolyte Interphase Layer toward Highly Stable Lithium Anode

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries

Dual-functional Separators Regulating Ion Transport Enabled by 3D-Reinforced Polyimide Microspheres Protective Layer for Dendrite-Free and High-Temperature Lithium Metal Batteries

Polydopamine-modified cellulose-based composite separator for inhibiting dendritic growth of lithium metal batteries

Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator

Separators Based on the Dynamic Tip‐Occupying Electrostatic Shield Effect for Dendrite‐Free Lithium‐Metal Batteries

Precise Control of Li+ Directed Transport Via Electronegative Polymer Brushes on Polyolefin Separators for Dendrite‐Free Lithium Deposition