Abstract:Lanthanum-containing materials are widely used in oxidative catalytic and electrocatalytic reactions such as oxidative coupling of methane (OCM) and solid oxide fuel cells (SOFCs). However, many of these materials are highly susceptible to air contamination which means ex situ characterization results generally cannot be associated with their reactivity. In this study, the activation processes of an in situ –prepared bulk La 2 O 2 CO 3 sample and an ex situ as-prepared La(OH) 3 sample are in situ investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and online mass spectroscopy (MS). Results indicate that the La 2 O 2 CO 3 sample, during linear heating to 800°C, always contains some carbonates near the surface region, which supports a two-step model of bulk carbonate decomposition through surface sites. The La(OH) 3 sample structure evolution is more complex due to contaminations from air exposure. Together with TGA results, online mass analysis of water and CO 2 signal loss showed that three major catalyst structure phase change steps and a preheating up to 800°C are required for the as-prepared material to be transferred to La 2 O 3 . This process is carefully investigated combining the three in situ methodologies. XPS and XRD data further reveal transformations of variety of in situ surface structures and forms including hybrid phases with hydroxyl, carbonates, and oxide as the sample heated to different temperatures within the range from 200 to 800°C. The results provide useful insights on the activation and deactivation of La-contained materials.

Effect of HNO3 treatment on the La0.6Sr0.4Co0.2Fe0.8O3-delta obtained via combined EDTA-citrate complexing process

Effect of HNO3 treatment on the La0.6Sr0.4Co0.2 Fe0.8O3-δ obtained via combined EDTA-citrate complexing process

Effect of HNO_3 Treatment on the La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ) Obtained via Combined EDTA-citrate Complexing Process

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

Enhancement of the electrocatalytic activity of La0.6Sr0.4Co0.2Fe0.8O3-δ through surface modification by acid etching

Investigation of Precursors in the Preparation of Nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ Via a Modified Combined Complexing Method

High performance La2NiO4+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells

Significant impact of nitric acid treatment on the cathode performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite oxide via combined EDTA-citric complexing process

Effects of Impregnating Palladium on Catalytic Performance of Lscf-Gdc Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Tuning the A‐site Element in LaCo0.8Fe0.2O3 Perovskite‐based Catalyst for High Temperature N2O Decomposition in Nitric Acid Plant

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Characterization And Stability Of La0.7sr0.3co0.3fe0.7o3 Perovskite-Type Oxide

A Novel Route to Synthesize Nano-Crystalline Ba0.5sr0.5co0.8fe0.2o3-Delta Perovskite Oxide at High Temperature

A Fundamental Study on the Chemical Stability of La1-xSrxCo0.2Fe0.8O3-delta Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Influences of Synthesis Route and Preparation Process on the Electrochemical Properties of Fe-doped Strontium Cobaltite

Facile Auto-Combustion Synthesis for Oxygen Separation Membrane Application

Preparation and characterization of porous La0.6Sr0.4C0.2Fe0.8O3-delta ceramics

Enhanced Electrochemical Performance and Operating Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Fiber Cathode Via Gd0.2Ce0.8O1.9-δ Coating for Intermediate Temperature Solid Oxide Fuel Cells

An In Situ Temperature-Dependent Study of La2O3 Reactivation Process

Enhancement of the electrochemical properties for La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrode by the addition of CaxCo4O9+δ nano-catalysts

Preparation and Oxygen-reduction Mechanism Investigation of Nanostructure LSCF-SDC Composite Cathodes