Abstract:Nanostructured La(0.6)Sr(0.4)Co(0.2)Fe(0.8)O(3-delta) (LSCF) oxide powder was synthesized by a facile autocombustion process based on a modified glycine-nitrate process (GNP) using cellulose fiber as micro-reactor. As compared with the normal GNP, this novel process allows the combustion to proceed in a much more environmentally friendly and controllable way. The resulted powder is nanocrystallized with particle size of only 15-20 nm as observed by transmission electron microscopy examination. More importantly, because the metal ions could disperse homogenously in cellulose-GN precursor, SrCO(3) impurity was effectively suppressed. The concentrations of SrCO(3) impurity in LSCF products were determined by carbon dioxide-temperature-programmed desorption technique, which decreased to as low as 1.3 wt% from cellulose-GN process, in contrast to 4.3 wt% from the normal GNP. These features resulted in the attractive improvement of its cathode performance in solid-oxide fuel cells (SOFCs). The interfacial resistances of only similar to 0.70 and similar to 0.36 Omega.cm(2) at 600 degrees and 650 degrees C under air, respectively, were observed, which was about two times better than the LSCF cathode derived from the normal GNP. A peak power density of similar to 346 mW/cm(2) was achieved at 600 degrees C with cellulose-GN-derived LSCF cathode based on thin-film Sm(0.2)Ce(0.8)O(1.9) electrolyte SOFC using 3% humidified H(2) as the fuel.

Facile Auto-Combustion Synthesis for Oxygen Separation Membrane Application

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

Sintering And Oxygen Permeation Studies Of La0.6sr0.4coo2fe0.8o3-Delta Ceramic Membranes With Improved Purity

Sintering and Oxygen Permeation Studies of La0.6Sr0.4Co0.2Fe0.8O3−δ Ceramic Membranes with Improved Purity

Effect of foreign oxides on the phase structure, sintering and transport properties of Ba 0.5Sr 0.5Co 0.8Fe 0.2O 3-anddelta; as ceramic membranes for oxygen separation

Novel Approach for Developing Dual-Phase Ceramic Membranes for Oxygen Separation through Beneficial Phase Reaction

Effect of HNO3 treatment on the La0.6Sr0.4Co0.2Fe0.8O3-delta obtained via combined EDTA-citrate complexing process

Effect of HNO3 treatment on the La0.6Sr0.4Co0.2 Fe0.8O3-δ obtained via combined EDTA-citrate complexing process

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Effect of HNO_3 Treatment on the La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ) Obtained via Combined EDTA-citrate Complexing Process

A Novel Cobalt-Free, CO2-stable, and Reduction-Tolerant Dual-Phase Oxygen-Permeable Membrane.

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

High performance La2NiO4+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

High-flux dual-phase percolation membrane for oxygen separation

LSCF Nanopowder from Cellulose–Glycine-Nitrate Process and its Application in Intermediate-Temperature Solid-Oxide Fuel Cells

Silver-doped strontium niobium cobaltite as a new perovskite-type ceramic membrane for oxygen separation

Enhancement of the electrochemical properties for La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrode by the addition of CaxCo4O9+δ nano-catalysts

A new (La0.2Nd0.2Gd0.2Sr0.2Ba0.2)Co0.2Fe0.8O3-δ high-entropy oxide cathode for intermediate temperature solid oxide fuel cell