Notice of Retraction: Understanding the STEP-NC Data Model for Computer Numerical Control

Yu Zhang,Xiaolan Bai,Xun Xu,Yongxian Liu

DOI: https://doi.org/10.1109/icacc.2010.5487009

2010-01-01

Abstract:This article has been retracted by the publisher.

What problem does this paper attempt to address?

Retraction Note To: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains

Hui-Qun Chen,Qing-Hui Wang

DOI: https://doi.org/10.1007/s00170-019-04098-y

IF: 3.563

2019-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:The authors have retracted this article [1]
RETRACTION: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains (retraction of Vol 99, Pg 1467, 2018)

Hui-Qun Chen,Qing-Hui Wang

DOI: https://doi.org/10.1007/s00170-019-04098-y

2019-01-01

Abstract:The authors have retracted this article [1]
Notice of Retraction A fast error measurement system for CNC machine tools based on step-gauge

liu hongqi,tian ying,li bin,mao xinyong,peng fangyu,mao kuanmin

DOI: https://doi.org/10.1109/ICMEE.2010.5558427

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. Traditional error measuring methods for CNC machine tools are often restricted by repeated alignment in set-up, high price and strict measuring environment. In order to develope a convenient and fast error measuring system, research about the principle of error measurement based on step-gauge has been done. The proposed equipment is convenient for it has no demand for installation accuracy and working environment. It can identify the gesture of step-gauge with its own measuring function. And automatic correction of micrometer and step-gauge's gesture can eliminate interference caused by installation, which has greatly enhanced the efficiency. Temperature difference compensation enables the equipment to perform in the workshop. This method is fast with accuracy within 2~3 μm, which can be applied to measure position error of economy machine tools. In addition, it can generate corresponding compensation files for various CNC system.
Notice of Retraction an Improved Predictor-Corrector Procedure for the Dynamics of Geometrically Nonlinear Shell Structure

Xiaomin An,Min Xu

DOI: https://doi.org/10.1109/iccet.2010.5485912

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. For geometrically nonlinear structure, the expressions of tangent stiffness matrix and internal forces of shell element are derived by CR (Co-rotational) theory, and the simplified formulation is performed on static analysis of a hinged cylindrical segment and validated by the results of experiment and references. Then, a predictor-corrector procedure with an approximately energy conservation is developed. With the application on nonlinear symmetric motion of a cylinder under two pinching forces, the improved procedure presents a better stability and accuracy than nonlinear Newmark algorithm.
STEP-NC Machining Program Information Extraction System

ZHOU Gang,WU Yi-jie,PAN Xiao-hong

DOI: https://doi.org/10.3969/j.issn.1006-5911.2007.10.017

2007-01-01

Computer Integrated Manufacturing Systems

Abstract:STandard for the Exchange of Product model data-compliant Numerical Control data interface(STEP-NC) data model and machining program structure were firstly analyzed.Machining program information extraction system was designed.Principles and realization method of model entity construction,lexical analysis,entity-instance matching and information assorting with feature reconstruction were discussed in detail.Based on above-proposed model,the STEP-NC information extract experiment prototype system was developed,and it was proved to be effective in reading the examples of ISO STEP-NC FDIS.
Notice of RetractionOptimization of Bionics Knee Joint Mechanism Structure

Li Jing,Qin Xiansheng

DOI: https://doi.org/10.1109/cctae.2010.5544197

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. In order to have a better quality performance of motion, the transmission angle of bionics knee joint is optimized. Firstly, the structure of the human knee is analyzed with consideration of the skeletal muscle and bone as slider-crank mechanism; secondly, the structure and mathematic model of the bionics knee joint is built; thirdly, the independent parameters and the working stroke minimum transmission angle formula of slider-crank mechanisms are determined by investigating the geometrical relations and the working stroke transmission angle of slider-crank mechanisms. A useful method is provided in order to improve the effective force transmission performance of slider-crank mechanism during conceptual design.
Notice of Retraction: Adaptive Decentralized Tracking Control for Nonlinear Large-Scale Systems.

Karthik Chandran,Weidong Zhang,Rajalakshmi Murugesan,S. Prasanna,A. Baseera,Sanjeevi Pandiyan

DOI: https://doi.org/10.1142/s0218488520400176

2021-01-01

International Journal of Uncertainty Fuzziness and Knowledge-Based Systems

Abstract:This article has been retracted at the request of the first and corresponding author, Dr. Karthik Chandran. The author has alerted the Editor-in-Chief of IJUFKS the reasons for the retraction: The proposed system was modelled with the incorrect data set. The system response has become incorrect because of this incorrect data set. Two percent of the information (mathematical assumptions) was taken from one paper without proper citation of the source.
RETRACTED: the Generalized Double Steps Scale-Sor Iteration Method for Solving Complex Symmetric Linear Systems

Zheng-Ge Huang,Li-Gong Wang,Zhong Xu,Jing-Jing Cui

DOI: https://doi.org/10.1016/j.cam.2018.07.022

IF: 2.872

2019-01-01

Journal of Computational and Applied Mathematics

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal ( http://www.elsevier.com/locate/withdrawalpolicy ). This article has been retracted at the request of the Principal Editor. The research overlaps a lot with research that has already appeared in Calcolo (2018) 55: 8. https://doi.org/10.1007/s10092-018-0252-9 and Mediterr. J. Math. (2016) 13: 2301. https://doi.org/10.1007/s00009-015-0621-4 . Although these papers are cited in the final published article, no mention of these papers was made in either the initial submission or the revised paper that was accepted by the Editor. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
Notice of Retraction Offset algorithm for non-circular contour with point cloud data

Manchao Zhang,Zhenqiang Yao,Jun Hu

DOI: https://doi.org/10.1109/ICCASM.2010.5623066

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. Cam is a typical contour on non-circular grinding. The data of cam profiles could be illustrated based on taking the lift of a flat follower or roller as a function of cam rotation angle and converting it into the polar coordinates of the cam profile. According to working principle of camshaft grinding machine, the coordinates of cam profile and grinder can be calculated. This paper analyzes the conventional tool-offset methods and B-spline tool-offset method. A new algorithm for cam curve offsetting is proposed by using coordinates of cam profile and grinder. The method is applicable to outer cams. Experimental results showed that can be successfully machined.
RETRACTED: Measurement and Analysis of Chinese Journal Discriminative Capacity

Baolong Zhang,Hao Wang,Sanhong Deng,Xinning Su

DOI: https://doi.org/10.1016/j.joi.2021.101132

2021-01-01

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted upon request of the authors. After publication of this article, the authors contacted the Editor-in-Chief to alert her of errors in the data used in the study. The bibliographic data contains several journal mismatches which lead to the deviation of the data results, as well as the errors in the figures and tables in the paper. After careful consideration, the authors have requested to retract and the Editor-in-Chief has agreed. The authors offer their apologies to readers, Editors and reviewers of this paper.
RETRACTED: an Analytical Curvature-Continuous Bézier Transition Algorithm for High-Speed Machining of a Linear Tool Path

Qing Zhen Bi,Yong Qiao Jin,Yu Han Wang,Li Zhu,Han Ding

DOI: https://doi.org/10.1016/j.ijmachtools.2012.01.008

IF: 10.331

2012-01-01

International Journal of Machine Tools and Manufacture

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The article has been retracted as it is a duplicate of the concept contained in the previously published article: A Practical Continuous-Curvature Bezier Transition Algorithm for High-Speed Machining of Linear Tool Path, Volume 7102(2011) 465–476. doi:10.1007/978-3-642-25489-5_45.
Notice of Retraction: Dynamic process of Internet culture evolution based on complex network

Li Shao,Mingsheng He,Xianzhong Gao

DOI: https://doi.org/10.1109/SWS.2011.6101271

2011-01-01

Abstract:This article has been retracted by the publisher.
RETRACTED: Using genetic algorithms to detect and configure shaft crack for rotor-bearing system

Yongyong He,Dan Guo,Fulei Chu

DOI: https://doi.org/10.1016/S0045-7825(01)00203-1

IF: 6.588

2001-01-01

Computer Methods in Applied Mechanics and Engineering

Abstract:This article has been retracted at the request of the Editors.
Retracted: An Evaluation Model of Urban-Rural Exchange Teachers in Elementary School Based on Optimal Control Neural Network

Mathematical Problems in Engineering

DOI: https://doi.org/10.1155/2023/9854976

IF: 1.43

2023-09-16

Mathematical Problems in Engineering

Abstract:This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process: (1) Discrepancies in scope (2) Discrepancies in the description of the research reported (3) Discrepancies between the availability of data and the research described (4) Inappropriate citations (5) Incoherent, meaningless and/or irrelevant content included in the article (6) Peer-review manipulation

engineering, multidisciplinary,mathematics, interdisciplinary applications
Notice of Retraction A Failure Rate Model Analysis for Repairable System

Wei Peng,Xiaoling Zhang,Hong-Zhong Huang,Yu Liu

DOI: https://doi.org/10.1109/qr2mse.2013.6625679

2013-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. Failure rate is a commonly used reliability measure for engineering systems. Accurately describing failure rate of a system often plays a crucial role in maintainability analysis and modeling. The failure dependency among components will accelerate the failure process of entire system. This paper proposes a new failure rate model with considering the failure interaction between components. Examples are presented to analyze the proposed methods. As demonstrated in the case study, the results from the model is very close to the results from real systems.
Retracted: Economic Forecasting Model Based on Chaos Simulated Annealing Neural Network

Mathematical Problems in Engineering

DOI: https://doi.org/10.1155/2023/9816281

IF: 1.43

2023-09-16

Mathematical Problems in Engineering

Abstract:This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process: (1) Discrepancies in scope (2) Discrepancies in the description of the research reported (3) Discrepancies between the availability of data and the research described (4) Inappropriate citations (5) Incoherent, meaningless and/or irrelevant content included in the article (6) Peer-review manipulation

engineering, multidisciplinary,mathematics, interdisciplinary applications
Notice of Retraction An enhanced ultrasonic automatic detecting system for locomotive axles

Cheng Zou,Zhen-guo Sun,Qi-dong Ma,Jing-ran Wu

DOI: https://doi.org/10.1109/AIMSEC.2011.6010063

2011-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. An enhanced ultrasonic automatic detecting system has been established to improve the efficiency and accuracy of the flaw detecting process for locomotive axles. The mechanical, electrical and software systems are separately illustrated in this paper. All of the moving elements are automatically controlled by the synergistic operation of the PLC (Programmable Logic Controller) and the IPC (Industrial Personal Computer). In order to efficiently make use of the space and reduce the detecting time, detectors are grouped into two sets, and each set is detects half part of the axle. The ultrasonic excitation and the echo signals are transmitted and received by the two-channel ultrasonic transceiver. The ultrasonic echo signals are displayed in the main interface of the control software in real time and the suspected flaw echo signals are diagnosed according to the threshold criterion or DAC (Distance Amplitude Curve) criterion. And the equivalent flaw size could be calculated by using DAC criterion. Motion procedures, detecting parameters, flaw records, and operators' information are categorized and stored in the software's file system. Finally, the main technical indicators of the detecting system are listed.
Retraction: Continuum model for effective properties of orthotropic octet-truss lattice through additive manufacturing

DOI: https://doi.org/10.1080/15502287.2021.1959245

2021-08-04

International Journal for Computational Methods in Engineering Science and Mechanics

Abstract:We, the Author, Editor and Publisher of International Journal for Computational Methods in Engineering Science and Mechanics, have retracted the following article:
RETRACTED: Mathematical Modeling of Mould Temperature Field During Continuous Casting of Steel

Yanmin Xie,Huping Yu,Xueyu Ruan,Baofeng Wang,Yonglin Ma

DOI: https://doi.org/10.1016/j.jmatprotec.2007.07.043

IF: 6.3

2008-01-01

Journal of Materials Processing Technology

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy).This article has been retracted at the request of the Editors-in-Chief as it is a duplicate of a paper that has already been published in Int. J. Adv. Manuf. Technol., 30 (2006) 645–651, doi:10.1007/s00170-005-0100-3. One of the conditions of submission of a paper for publication is that authors declare explicitly that the paper is not under consideration for publication elsewhere. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. The first author takes full responsibility for this and would like to make it known that his co-authors were not involved.
Notice of Retraction The Control of Matrix Converter AC Excited Brushless Double-Fed Wind Power Unit

Qi Wang,Xiaohu Chen,Yanchao Ji

DOI: https://doi.org/10.1109/APPEEC.2010.5448183

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. Abstract-Based on the mathematic model of brushless double-fed machine under synchronous reference frame, this paper researches on the structure and control algorithm of matrix converter, discusses the control strategy of matrix converter AC excited brushless double-fed wind power unit, and completes the close-loop control of matrix converter taken as the excited device for AC excited variable-speed constant-frequency brushless double-fed generator. Computer simulation results verify the correctness and effectiveness of the control strategy.

Notice of Retraction: Understanding the STEP-NC Data Model for Computer Numerical Control

Retraction Note To: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains

RETRACTION: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains (retraction of Vol 99, Pg 1467, 2018)

Notice of Retraction A fast error measurement system for CNC machine tools based on step-gauge

Notice of Retraction an Improved Predictor-Corrector Procedure for the Dynamics of Geometrically Nonlinear Shell Structure

STEP-NC Machining Program Information Extraction System

Notice of RetractionOptimization of Bionics Knee Joint Mechanism Structure

Notice of Retraction: Adaptive Decentralized Tracking Control for Nonlinear Large-Scale Systems.

RETRACTED: the Generalized Double Steps Scale-Sor Iteration Method for Solving Complex Symmetric Linear Systems

Notice of Retraction Offset algorithm for non-circular contour with point cloud data

RETRACTED: Measurement and Analysis of Chinese Journal Discriminative Capacity

RETRACTED: an Analytical Curvature-Continuous Bézier Transition Algorithm for High-Speed Machining of a Linear Tool Path

Notice of Retraction: Dynamic process of Internet culture evolution based on complex network

RETRACTED: Using genetic algorithms to detect and configure shaft crack for rotor-bearing system

Retracted: An Evaluation Model of Urban-Rural Exchange Teachers in Elementary School Based on Optimal Control Neural Network

Notice of Retraction A Failure Rate Model Analysis for Repairable System

Retracted: Economic Forecasting Model Based on Chaos Simulated Annealing Neural Network

Notice of Retraction An enhanced ultrasonic automatic detecting system for locomotive axles

Retraction: Continuum model for effective properties of orthotropic octet-truss lattice through additive manufacturing

RETRACTED: Mathematical Modeling of Mould Temperature Field During Continuous Casting of Steel

Notice of Retraction The Control of Matrix Converter AC Excited Brushless Double-Fed Wind Power Unit