Abstract:Continuous linear commands are widely executed in computer numerical control (CNC) machining. The tangential discontinuity at the junction of consecutive segments restricts the machining efficiency and deteriorates the surface quality. Corners of linear segments have been successfully blended by inserting parametric splines. There still exists challenges when the common methods are employed in the line-segment commands due to part of the following restrictions: (1) the stringent computation for iteratively calculating the arc-length; (2) the unwanted feedrate fluctuation; (3) the oversize contour deviation for separately completing curve fitting and velocity planning. A novel smoothing method based on a clothoid pair to synchronously accomplish planning of geometry blending and speed scheduling is proposed, the spline parameter of which is arc-length-parameterized. The arc-length, curvature extreme, and geometric shape of the transition curve are analytically expressed by the transition length. On these bases, the transition curve and the velocity profile are concurrently constructed based on the predefined approximation error, the reachable velocity, and normal kinematic constraints in the look-ahead stage. Then, a real-time interpolation scheduling is developed to overcome the crossing difficulties between the linear and parametric segments. Compared with existing methods, the proposed method can analytically calculate the length of transition curves for the arc-length-parameterized expression form. Furthermore, the feedrate fluctuation is eliminated in the fine interpolation. Moreover, the overlarge contour derivation produced by corner smoothing is significantly avoided. It is friendlier to the CNC system for the on-line executing smooth motion since more computing resources can be released to handle other tasks, smoother motion can be achieved and higher contour accuracy can be obtained. The experimental results also demonstrate its practicability and reliability.

RETRACTED: an Analytical Curvature-Continuous Bézier Transition Algorithm for High-Speed Machining of a Linear Tool Path

Trochoid-path-based FEM Simulation for High-Speed Milling of Aluminum Alloy

Notice of Retraction Offset algorithm for non-circular contour with point cloud data

RETRACTION: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains (retraction of Vol 99, Pg 1467, 2018)

Analytical Curvature-Continuous Dual-Bézier Corner Transition for Five-Axis Linear Tool Path

An Analytical Transition Algorithm for Real-Time Cnc Machining of Linear Tool Path

Retracted: Design and Control of a High-Speed Switched Reluctance Machine with Conical Magnetic Bearings for Aircraft Application

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Retraction Note To: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains

Notice of Retraction an Improved Predictor-Corrector Procedure for the Dynamics of Geometrically Nonlinear Shell Structure

Notice of RetractionOptimization of Bionics Knee Joint Mechanism Structure

A Curvature-Continuous Transition Method with Axis High-Order Kinematic Limitations along Linear Segments

An Optimal Curvature-Smooth Transition Algorithm with Axis Jerk Limitations along Linear Segments

RETRACTED: A Novel Approach to Simulate Surface Topography Based on Motion Trajectories and Feature Theories of Abrasive Grains (retracted Article. See Vol. 104, Pg. 1613, 2019)

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

Retracted: Study of Surface Roughness of Cutting Isothermally Hardened Ductile Iron in Tosa Knife Forging Technique Based on Intelligent Calculation

RETRACTED: The Aeronautics Face-gear NC Hobbing Machining Technology (Retracted Article)

A locally optimal transition method with analytical calculation of transition length for computer numerical control machining of short line segments

Optimal curvature-smooth transition and efficient feedrate optimization method with axis kinematic limitations for linear toolpath

WITHDRAWN: A Robust and High-Fidelity Aerodynamic Optimization Design of Truss-Braced-wing Aircraft with Gradient-Based Method

A Newly Developed Corner Smoothing Methodology Based on Clothoid Splines for High Speed Machine Tools