Abstract:With the rapid development of modern gas turbines and aeronautical engines, temperature at the combustor outlet is consistently increasing, leading to an intensified interaction between combustor and turbine. Meanwhile, the turbulence, residual swirl, and presence of hot streak at the combustor outlet exert a considerable influence on the downstream turbine, notably affecting blade aerodynamics and heat transfer dynamics. Nowadays, significant research efforts have been focused on the coupled system of combustor and turbine, aiming to elucidate the flow dynamics and migration patterns of hot streak under complex interactions. This study presents a setup comprising a three-sector combustor and six turbine guide vanes (TGVs) equipped with advanced lean-burn dual-stage swirlers. Temperature distribution at the combustor outlet in the coupled system is measured through a high-temperature dual-axis displacement system. Numerical simulations are conducted to reveal the initiation and progression of hot streak within the combustor, operating within the coupled system. Moreover, the study investigates the impact of various contraction ratios on the mixing characteristics of gas and coolant within the combustor, as well as the migration process of hot streak in turbine guide vanes in the coupled system. Overall, numerical results indicate that the influence zone of the TGVs on the pressure within the combustor can reach the position of the dilution holes, significantly affecting both the depth and mixing characteristics of the jet from the dilution holes. As the contraction ratio increases, there is an observed increase in the outlet temperature distribution factor (OTDF) within the combustor, which is attributed to reduced mixing effects. Conversely, at the TGVs’ outlet, an increased flow velocity and improved mixing effects in the TGVs’ flow channel contribute to a more uniform temperature field. Furthermore, the clocking position of TGVs in this study is found to impede the mixing of coolant in various flow channels. This highlights the significance of establishing a correlation between TGVs’ clocking position and the inlet hot streak.

Temperature Measurement at the Exit of Annular Combustor with Slinger in Turbojet Engine

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Experimental Study on Self-Excited Thermoacoustic Instabilities and Intermittent Switching of Azimuthal and Longitudinal Modes in an Annular Combustor

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

An Measurement Investigation of the Crossflow Characteristics Through the Liner Holes in a Model Gas Turbine Combustor

Mechanism of exit temperature profile of gas turbine combustor

Investigation of Hot Streak Migrations in a Triple Dual-Stage Swirler Combustor Coupled with Turbine Vanes under Different Contraction Ratios

Experimental and Numerical Study on Temperature Variation and Air Flow Distribution in Trapped Votex Combustor

Investigation of Unsteady Combustion Regimes in a Kerosene-Fueled Scramjet with Air Throttling

Gas and solid phase temperature measurements of porous media combustion

Design and Optimization of a High Temperature Water Cooled Probe for Gas Analysis Measurement on K11 Combustion Test Rig

Experimental research on the thermal throat of rocket based combined cycle combustor

Experimental and numerical study on a cavity-swirler-based combustion strategy for advanced gas turbine engine

Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor

Measurement and Analyses of Heat Flux Data in a Turbine Stage: Part I—Description of Experimental Apparatus and Data Analysis

Temperature measurement of a turbulent buoyant ethylene diffusion flame using a dual-thermocouple technique

Numerical Investigation Of High Speed Combustion And Its Impact On Thermal Structure

Measurements of Heat Transfer and Pressure in a Trailing Edge Cavity of a Turbine Blade

Unsteady Pressure Measurements With a Fast Response Cooled Probe in High Temperature Gas Turbine Environments

Performance Test Of Dln Combustor For 110 Mw Heavy-Duty Gas Turbine

EXPERIMENTAL TEST RIG FOR COMBUSTOR-TURBINE INTERACTION RESEARCH AND TEST RESULTS ANALYSIS