Abstract:With the rapid development of modern gas turbines and aeronautical engines, temperature at the combustor outlet is consistently increasing, leading to an intensified interaction between combustor and turbine. Meanwhile, the turbulence, residual swirl, and presence of hot streak at the combustor outlet exert a considerable influence on the downstream turbine, notably affecting blade aerodynamics and heat transfer dynamics. Nowadays, significant research efforts have been focused on the coupled system of combustor and turbine, aiming to elucidate the flow dynamics and migration patterns of hot streak under complex interactions. This study presents a setup comprising a three-sector combustor and six turbine guide vanes (TGVs) equipped with advanced lean-burn dual-stage swirlers. Temperature distribution at the combustor outlet in the coupled system is measured through a high-temperature dual-axis displacement system. Numerical simulations are conducted to reveal the initiation and progression of hot streak within the combustor, operating within the coupled system. Moreover, the study investigates the impact of various contraction ratios on the mixing characteristics of gas and coolant within the combustor, as well as the migration process of hot streak in turbine guide vanes in the coupled system. Overall, numerical results indicate that the influence zone of the TGVs on the pressure within the combustor can reach the position of the dilution holes, significantly affecting both the depth and mixing characteristics of the jet from the dilution holes. As the contraction ratio increases, there is an observed increase in the outlet temperature distribution factor (OTDF) within the combustor, which is attributed to reduced mixing effects. Conversely, at the TGVs’ outlet, an increased flow velocity and improved mixing effects in the TGVs’ flow channel contribute to a more uniform temperature field. Furthermore, the clocking position of TGVs in this study is found to impede the mixing of coolant in various flow channels. This highlights the significance of establishing a correlation between TGVs’ clocking position and the inlet hot streak.

EXPERIMENTAL TEST RIG FOR COMBUSTOR-TURBINE INTERACTION RESEARCH AND TEST RESULTS ANALYSIS

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Effect Of Inlet Swirl On The Model Leading Edge Of Turbine Vane

Influence of complex inlet conditions on the flow field and flow characteristics in compact combustor for gas turbine

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Influences of device for flame joint and flow stabilization on performance of trapped vortex combustor

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Investigation of Hot Streak Migrations in a Triple Dual-Stage Swirler Combustor Coupled with Turbine Vanes under Different Contraction Ratios

Experiment and Simulation Study on Lean Blow-Out of Trapped Vortex Combustor with Various Aspect Ratios

Experimental Study on Flame Response Characteristics of a Non-Premixed Swirl Model Combustor

Experimental Study of Particle-Laden Turbulent Reacting Flow in a Swirl Combustor

Effects of inlet swirl condition on the flow and heat transfer performance of gas turbine vane

Computational Study on Compressor-Combustor Interactions for Improved Matching of a Micro Gas Turbine

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Experimental study of stratified swirl flame dynamics in a model gas turbine combustor

Experimental study on combustion flow field characteristics of swirl combustor

Experimental studies on swirling and recirculating two-phase flow field in a cold model of dual-inlet sudden-expansion combustor

Experimental Study of Turbulent Combustion in a Combustor with Staged Air Injection

The Effect of Mismatching Between Combustor and HP Vanes on the Aerodynamics and Heat Load in a 1-1/2 Stages Turbine