Abstract:Short and uniformly dispersed flames in multi-nozzle array combustors allow for shorter flue gas residence time, resulting in less NOx emissions at high combustor outlet temperature. A new combustion stabilization mechanism based on high-speed jet induced flue gas recirculation has been utilized in an array model combustor. The stabilization mechanism allows for stable combustion at higher nozzle outlet velocity. The flame stabilization mechanism and combustion characteristics for the model combustor fueled methane have been investigated by using the combination of experiments and numerical simulations. The parameters studied include nozzle outlet velocity, inlet air temperature, and heat loss ratio. The combustion characteristics include NOx/CO emissions and reaction zone distribution. The results show that the flame stabilization mechanism is a result of the combined effects of the inner and outer recirculation zone. Under atmospheric conditions within the adiabatic temperature range from 1500 K to 2100 K, the NOx emissions are less than 20 ppm@15%O2 and the CO emissions are less than 30 ppm@15%O2. As the heat loss ratio decreases, the NOx emissions for the model combustor increase. When the nozzle outlet velocity increases, the lean blowout (LBO) for the model combustor increases. With increasing inlet air temperature, the equivalent ratio range of combustion stability expands. The downstream of the reaction zone is mostly affected by the nozzle outlet velocity and inlet air temperature, while the root of the reaction zone is essentially unaffected due to the role of inner recirculation zone. The unique stabilization mechanism of the multi-nozzle array combustion is beneficial for fuel flexibility.

Influences of device for flame joint and flow stabilization on performance of trapped vortex combustor

Experimental and Numerical Study on Temperature Variation and Air Flow Distribution in Trapped Votex Combustor

Experiment and Simulation Study on Lean Blow-Out of Trapped Vortex Combustor with Various Aspect Ratios

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Effect of Swirl Field on the Fuel Concentration Distribution and Combustion Characteristics in Gas Turbine Combustor with Cavity

Experimental studies on swirling and recirculating two-phase flow field in a cold model of dual-inlet sudden-expansion combustor

Effects of swirling motion on the cavity flow field and combustion performance

Ignition, lean blowout, and flame propagation in a combustor using flameholder with a trapped vortex cavity

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Numerical Simulation of the Effects of Center Tube and Multiple Air Injection on the Gas Flow Field in a Vortex Combustor

Measurements of Mixing Layers and Vortex Structures of the Strut-Induced Flow in a Scramjet Combustor with PIV and POD

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Influence of complex inlet conditions on the flow field and flow characteristics in compact combustor for gas turbine

Investigation of a novel combustion stabilization mechanism and combustion characteristics of a multi-nozzle array model combustor

Effect of a passive control strategy on lean ignition and blowout performance of a gas turbine combustor

A Study on Lean Blowout of Multi-vortexes-dome Model Combustor

Effects of fuel injection on the combustion and emission performance of a trapped vortex combustor

SIMULATION OF GASEOUS COMBUSTION AND HEAT TRANSFER IN A VORTEX COMBUSTOR

Experimental and numerical study on a cavity-swirler-based combustion strategy for advanced gas turbine engine

Experimental and numerical investigation of the combustion behavior in a conical vortex combustor