Abstract:Oil-immersed pressboard are used in transformer to separate high voltage winding and low voltage winding, as well as providing structural support. Thus during normal operation of a transformer, oil-immersed pressboard will be subjected to the action of mechanical stress and constantly aging. Moreover, when the transformer suffers a sudden short-circuit, huge axial force will act on the pressboard near winding ends, affecting insulation properties of the pressboard, leading to failure of the transformer. Therefore, it is necessary to study the evolution of insulation properties of oil-impregnated paperboard under different mechanical stress. In this paper, normal mechanical stress experiments on oil-immersed pressboard were performed, and partial discharge tests of insulation pressboard after pressed were carried out in order to obtain its partial discharge inception voltage, breakdown voltage, and partial discharge characteristics. A material testing machine is used to apply mechanical stress between 0 and 100MPa to the pressboard and the strain curve is recorded as well. Insulation characteristics of pressed oil-immersed pressboard were obtained by performing both short-term and long-term partial discharge tests under point-plane electrodes. Experimental result indicates that mechanical stress on pressboard will reduce its insulation ability. As the applied mechanical stress increases, the breakdown voltage and withstand voltage time of pressboard will continue to decrease. Partial discharge inception voltage stays substantially when the mechanical stress is relatively low but decreases rapidly when the mechanical stress is higher than 20MPa. When the mechanical stress is higher, the maximum discharge magnitude and average discharge magnitude will be higher, but the distribution phase of discharges has little to do with the mechanical stress.

Effect of Temperature and Pre-stressed Voltage on Breakdown of Oil-Impregnated Paper

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

Research on Deterioration Mechanism of Oil-paper Insulation of 220 Kv Current Transformer

Research on the variation of dielectric properties of oil‐paper insulation for power equipment over a wide temperature range

Influence of thermal aging on the breakdown characteristics of transformer oil impregnated paper

Influence of temperature and thermal aging on breakdown voltage of oil-paper insulation

The Effect of Aging on Electrical Lifetime of Oil Immersed Pressboard under Partial Discharge

Investigation on AC Dielectric and Breakdown Properties of Fluorinert Liquid-Impregnated Insulation Paper

The Influence of Temperature on Partial Discharges and Wormhole Effect of Oil-Paper Insulation under DC Voltage

Effect of Space Charge on Breakdown Characteristics of Aged Oil-Paper Insulation under DC Voltage

The DC Breakdown of Mineral Insulating Oil and Oil-Pressboard

The Effect Of Moisture And Temperature On The Oil-Immersed-Paper Used In Ehv Converter Transformer

Electrical and Mechanical Properties of the Oil-Paper Insulation under Stress of the Hot Spot Temperature

Surface Degradation of Oil-Immersed Nomex Paper Caused by Partial Discharge of High-Frequency Voltage

Effect of Insulation Thickness on Deterioration Characteristics of Oil-Paper Insulation under Switching Impulse Voltage

Research on Influence of Mechanical Stress on Insulation Characteristics of Oil-immersed Pressboard

Study on Electrical Properties of Vegetable Insulating Oil Impregnated Pressboard

Analysing the Suitability of Using Different Biodegradable Fluids for Power Transformers with Thermally Upgraded Paper

Electrical properties of oil-paper insulation affected by water conductivity during paper-making process

Insulation degradation and fracture cracks of mechanical impacted thermal‐ageing oil‐impregnated papers

Conduction characteristics in transformer oil and electrical insulation paper