Abstract:A hydrothermal procedure was utilized to synthesize high silica H-ZSM-5 catalysts for application in methanol to olefin (MTO) reaction by partial and total substitution of tetrapropyl ammonium hydroxide (TPAOH) with equivalent amount of the less expensive tetrapropyl ammonium bromide (TPABr) template. Five H-ZSM-5 zeolites with a similar Si/Al ratio (200) were synthesized using various proportions of TPAOH and TPABr. The TPA+ concentration (0.04 M) and initial gel pH (10.5) were constant. The catalysts were characterized by TG–DTA, XRD, ICP, FE-SEM, BET, FT-IR and NH3-TPD techniques. The samples showed cubic morphology, but their particle sizes and shapes were different. The highest crystallinity were obtained by single template synthesis for MFI structure whereas using mixed template synthesis led to lower crystallinity and larger crystallite sizes. Increasing molar ratio of TPAOH in initial gel from 0.33 to 3 decreased the purity of H-ZSM-5, and also affected its crystallinity and particle size. The NH3-TPD results indicated that both TPAOH and TPABr templates exhibited almost the same effect on the acidity of the as-synthesized catalysts, whereas mixing the two templates increased the total acidity and decreased the content of strong acid site. The catalytic performance of all samples was evaluated in MTO reaction in a fixed-bed reactor at 480 °C and atmospheric pressure using feed containing a mixture of 50 wt% methanol in water with methanol WHSV of 0.9 h−1. All the catalysts exhibited approximately similar methanol conversion though their propylene selectivities and products distributions were greatly dependent on the template composition. This work verified that despite providing the same TPA+ and OH− concentrations in the initial gel, the H-ZSM5 samples with different properties could form using diverse template combinations.

Synthesis of HZSM-5 Catalyst by Template-Free Method for Hydration of Cyclohexene to Cyclohexanol

HZSM-5 zeolite modification and catalytic reaction mechanism in the reaction of cyclohexene hydration

A Study of ZSM-5 Molecular Sieve Shaping for an Innovative Cyclohexene Hydration Process

Amphiphilic HZSM-5 for Cyclopentene Hydration at the Liquid–Liquid Interface in Pickering Emulsion

Studing on Prepration of Cyclohexene by Various Catalysts

Synthesis of Hierarchical ZSM‐11 Nanorods Aggregates and Catalytic Properties in Cyclohexene Hydration to Cyclohexanol

Study on Process of Cyclohexene Hydration over Solid Zeolite

Amphiphilic HZSM-5 Zeolite Catalyst for Hydration of Cyclohexene on Phase-boundary Interface

Polystyrene-Based Hierarchically Macro–Mesoporous Solid Acid: A Robust and Highly Efficient Catalyst for Indirect Hydration of Cyclohexene to Cyclohexanol by a One-Pot Method under Mild Conditions

Direct synthesis of H type ZSM-5 in shaped form and catalytic properties in methanol-to-hydrocarbon reaction

Synthesis of Acetals or Ketals over Zeolite Hβ Catalyst

Facile Synthesis of a Novel Hierarchical ZSM‐5 Zeolite: A Stable Acid Catalyst for Dehydrating Glycerol to Acrolein

Hydrothermal synthesis of H-ZSM-5 catalysts employing the mixed template method and their application in the conversion of methanol to light olefins

The quest for a better solvent for the direct hydration of cyclohexene: From molecular screening to process design

Green synthesis of shaped nano-ZSM-5 toward more efficient methanol-to-hydrocarbon conversion

Hierarchical Zsm-5 Catalyst Synthesized by A Triton X-100 Assisted Hydrothermal Method

Research progress in cyclohexene hydration to cyclohexanol

Synthesis of ZSM-5 Catalysts with Tunable Mesoporosity by Ultrasound-Assisted Method: A Highly Stable Catalyst for Methanol to Propylene

Direct synthesis of HZSM-5 zeolites with enhanced catalytic performance in the methanol-to-propylene reaction

High-Entropy Oxides derived Cu catalyst for enhanced dehydrogenation of cyclohexanol coupling with hydrogenation of acetone

Synthesis of hollow HZSM-5 zeolite-based catalysts and catalytic performance in MTA reaction