Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Characterization of Vein-Like Structures Formed in Nitrided Layers During Plasma Nitriding of 8cr4mo4v Steel

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Effect of nitriding on the transformation of alloy carbides (VC and Mo2C) in 8Cr4Mo4V steel

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Nitriding layer characteristics of modified AISI422 martensitic stainless steel in tempered state

Microstructure Analysis of Abnormal Nitriding Layer of 2Cr10MoVNbN

Microstructural characterization of plasma nitrided austenitic stainless steel

Nitrogen–carbon-induced Spinodal Structure in Plasma Nitrocarburized 38crmoal with Hollow Cathode Discharging

Structural Characteristics of Low-Temperature Plasma-Nitrided Layers on AISI 304 Stainless Steel with an Α′-Martensite Layer

Microstructural Characterization And Formation Mechanism Of Nitrided Layers On Aluminum Substrates By Thermal Plasma Nitriding

Preparation and characterization of ultra-refined expanded martensite α′N

Structure and corrosion behavior of ultra-thick nitrided layer produced by plasma nitriding of austenitic stainless steel

Characterization and electrochemical behavior of a multilayer-structured Ti–N layer produced by plasma nitriding of electron beam melting TC4 alloy in Hank's solution

Study of Microstructure of Low-Temperature Plasma-Nitrided AISI 304 Stainless Steel

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Co-existence of γ'N phase and γN phases on nitrided austenitic Fe-Cr-Ni alloys- I. Experiment

The microstructural characterization of the nitrided layers prepared by direct current nitrogen arc

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Acceleration of Plasma Nitriding at 550 °C with Rare Earth on the Surface of 38CrMoAl Steel

XPS Study on Chemical State and Phase Structure of PBII Nitriding M50 Steel

Phase depth distribution characteristics of the plasma nitrided layer on AISI 304 stainless steel