Abstract:The cohesive zone model has been applied in different computational fracture mechanical investigations. However, effects of the cohesive law on crack simulation results have not been systematically and quantitatively studied. To quantify the influence of the cohesive law, a special cohesive element has been developed and implemented into the commercial FEM code ABAQUS. The detailed computational investigation of compact tension (CT) specimens confirms that the load vs. load line displacement curve hardly depends on the initial cohesive stiffness of the cohesive zone, but the fracture parameters, such as delta(5), may deviate up to 5%. A significant difference is observed in prediction of crack propagation, which exceeds 35% for a given load line displacement in CT specimens. To diminish artificial influence of the cohesive zone model, one has to increase the specific cohesive stiffness. The J-integral as the critical energy release rate generally differs from the cohesive energy. The elastic unloading and plastic reloading around the cohesive zone affect the fracture energy amount. The difference between the cohesive energy and the critical energy release rate depends on the cohesive law as well as the ductility of the material, vanishes only in an elastic specimen and exceeds 40% for ductile materials. The discrepancy between J and the cohesive energy grows and is stagnated for the cohesive strength larger by three times the initial yield stress. To obtain realistic computational results by using cohesive zone models, one has to build the cohesive law with proper parameters. (C) 2014 Elsevier Ltd. All rights reserved.

The Influence of Different Constitutive Model Relations on Mechanical Behavior of Crack Tip Plastic Zone

Influences of Initial Porosity, Stress Triaxiality and Lode Parameter on Plastic Deformation and Ductile Fracture

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

COMPUTER SIMULATED ANALYSES ON DEFORMATION AND FRACTURE OF NON-CRACKED AND CRACKED SPECIMENS

Comparative Investigation on Influences of Concrete Material Constitutive Models on Structural Behavior

Analysis of a Finite Element Model of 2-D Elastic-Plastic Crack

Investigation for Plastic Damage Constitutive Models of the Concrete Material

Experimental and Numerical Study on Plastic Zone Variation Ahead of Fatigue Crack Tip

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Research on Cyclic Plastic Zone Near Crack Tip

Cohesive Zone Modeling for 3D Ductile Crack Propagation

A Ductile Fracture Model Incorporating Stress State Effect

New Constraint Parameters Based on Crack Tip Plastic Zone: Theoretical Derivations and Effectiveness Verification

The Elastic-Viscoplastic Field at the Mixed-Mode Crack-Tip under Compression and Shear

Theoretical Study on Extension of Crack Tip Plastic Zone by Remote Simple Tensile Considering Crack Interaction

The Influenced Zones of Stress Intensity Factor and Plasticity at Multi-Crack Tips

MODELLING THE INFLUENCE OF STRAIN HARDENING AND PLASTIC CONSTRAINT ON CRACK CLOSURE OF ARBITRARILY THICK CCT-SPECIMENS

An Incremental Elastic-Plastic Cohesive Constitutive Model with Considering Damage

Analytical Characterizations of Crack Tip Plastic Zone Size for Central-Cracked Unstiffened and Stiffened Plates under Biaxial Loading

Constraints on the Crack Tip Plastic Fields under Large Scale Yield