Abstract:On the basis of the study for the heat generation mechanism in unidirectional composites under tensile impact and the interaction between the temperature and the mechanical behaviour of the composite and its constituents, a dynamic Monte Carlo microscopic damage constitutive model taking thermo-mechanics coupling into account is proposed. The foundation of the model is the dynamic Monte Carlo microscopic numerical constitutive damage model for unidirectional composites. The key of the model is to calculate the coupling effect through a statistical average interation method. In this way one can simulate the composite deformation, damage and failure process, and predict its stress/strain curve. The numerical results (stress/strain curves) for unidirectional GRP provide good correlation with experiment results at a strain rate of 300 s−1, based on the bimodal Weibull distribution model of fiber strength. This suggests that the model and the method are rational and effective. Further study shows that the non-linearity of the dynamic stress/strain curve of the composite and its toughness at high strain rates are mainly induced by the cumulative breakage of fibers and its rate and temperature dependence, and thermo-mechanical coupling. Inertia has some effect on the non-linearity of the stress/strain curve and the high-velocity toughness of the composites. The study also shows that the simulations should be carried out on the bimodal Weibull distribution model of the fibers strength. However, there exist a certain deviation between the simulation results and the experiment results when the strain rate is above 800 s−1, and the strain is more than 4%, and further investigation is necessary.

An Incremental Elastic-Plastic Cohesive Constitutive Model with Considering Damage

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Application and Analysis of Plane Woven C/Sic Composites Based on Continuum Damage Mechanics

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

A Micromechanics Based Elasto-Plastic Damage Model for Unidirectional Composites under Off-Axis Tensile Loads.

A Dynamic Constitutive Model for Fiber-Reinforced Composite under Impact Loading

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Modeling of Crack Bridging and Failure in Heterogeneous Composite Materials: A Damage-Plastic Multiphase Model

A rate-dependent cohesive zone model with the effects of interfacial viscoelasticity and progressive damage

A Dynamic Monte Carlo Microscopic Damage Model Incorporating Thermo-Mechanical Coupling in a Unidirectional Composite

A Micromechanics-Based Damage Model for Compressive Behavior Analysis of Impacted Composite Laminates

Irreversible Deformation of Metal Matrix Composites: A Study Via the Mechanism-Based Cohesive Zone Model

Modeling of Damage Evolution and Failure in Fiber-Reinforced Ductile Composites under Thermomechanical Fatigue Loading

A new constitutive model of micro-particle reinforced metal matrix composites with damage effects

Multiscale modelling of progressive damage in fiber-reinforced composites

An Equivalent Elastoplastic Damage Model Based on Micromechanics for Hybrid Fiber-Reinforced Composites under Uniaxial Tension

Damage Constitutive Equations and its Application to Fiber Reinforced Composites under Transverse Impact

Microscale Damage Evolutions in Fiber-Reinforced Composites with Different Initial Defects

Damage Characteristics and Constitutive Modeling of the 2D C/SiC Composite: Part II – Material Model and Numerical Implementation

Rate-Dependent Cohesive Models for Dynamic Mode I Interfacial Propagation and Failure of Unidirectional Composite Laminates

A Damage Constitutive Model for the Nonlinear Mechanical Behavior of C/SiC Composites During Mechanical Cyclical Loading/unloading