Abstract:The mechanical properties of unidirectional fiber-reinforced plastic (UD-FRP) are affected by a variety of micro-defects, such as random fiber arrangement, fiber misalignment and micro-voids. This study aims to investigate how these multiple micro-defects interact with each other and how they affect the strength and failure mechanism of UD-FRP by means of computational micromechanics. The composite behavior was simulated by the finite element analysis of a representative volume element of the composite microstructure in which the random distribution of fibers, the micro-voids, and the fiber misalignment are explicitly included. Both matrix and interface failure were considered for the loadings of transverse tension/compression, longitudinal compression, transverse/longitudinal shear, and their combination. It was found that these three micro-defects significantly weakened the compressive strength of UD-FRP along the longitudinal direction. Especially, the fiber misalignment magnified the effect of fiber arrangement, while the micro-voids reduce the effect. Besides, the fiber arrangement and micro-voids significantly weakened the tensile and compressive strength of UD-FRP along the transverse direction, but their interaction effect was not obvious. Moreover, transverse and longitudinal shear strength are significantly affected by micro-voids, but only longitudinal shear is affected by geometric fiber arrangement, and this effect is also weakened by micro-voids. Finally, the damage envelope under the combined longitudinal compression and transverse loads was obtained and compared with the Tsai-Wu failure criterion. The results showed that the Tsai-Wu criteria can provide an effective estimation for the failure locus under this biaxial loading condition.

Microscale Damage Evolutions in Fiber-Reinforced Composites with Different Initial Defects

Progressive failure analysis of 2D woven composites at the meso-micro scale

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Micro Failure Analysis of Fiber Metal Laminates

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Damage Evolution and Multi-Scale Analysis of Carbon Fiber-Reinforced Cross-Ply Laminate with Thermal Residual Stress

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Progressive Damage and Failure Modeling in Fiber-Reinforced Laminated Composites Containing a Hole

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

A Monte Carlo simulation of damage and failure process with crack saturation for unidirectional fiber reinforced ceramic composites

Modeling Tensile Damage and Fracture Behavior of Fiber-Reinforced Ceramic-Matrix Minicomposites

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method