Abstract:BackgroundThe investigation of reinforced concrete slabs under impact loading through the experiment is expensive and time-consuming however technological advancements enable the numerical methods to save experimental resources. The manuscript states that the numerical methods involve the selection of the material model which is quite sensitive due to the high complexity of the calibration process, especially the stress-inelastic strain behaviour and damage parameters.MethodologyWithin the context, the present study considers the five largely known stress–strain models (Alfarah et al. Model, Carreira and Chu Model, Chinese Model code (GB50010-2002), CEB-FIP Model Code 2010 and Aslani and Jowkarmeimandi Model, designated as M1, M2, M3, M4 and M5, respectively) of concrete through the Concrete Damage Plasticity (CDP) model using ABAQUS finite element software.ObjectiveThe accuracy and reliability of these five models were studied and compared for varying strength of concrete and thickness of slab with the experimental results available in the literature under low-velocity impact. The numerical models were predicted in terms of impact force, displacement, acceleration and strain in concrete as well as reinforcement. ConclusionIt was concluded that Alfarah et al. model (M1) was found to be the best predicting model in terms of impact force and midpoint displacement due to mesh insensitivity which is based on element characteristic length. The acceleration-time response was accurately captured by Alfarah et al. model (M1) and least predicted by the GB50010-2002 model (M3). Further, statistical analysis was performed to evaluate the performance of each model in predicting the factors affecting the behavior of concrete under impact loading. It was observed that model M1 was found to be the best at predicting the impact force and midpoint displacements among the chosen models. It was also observed that the Aslani and Jowkarmeimandi model (M5) was found to predict acceleration better than other models.

Comparative Investigation on Influences of Concrete Material Constitutive Models on Structural Behavior

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

COMPARISON STUDY OF CONSTITUTIVE MODEL OF CONCRETE IN ABAQUS FOR STATIC ANALYSIS OF STRUCTURES

State-of-art of corrosion-induced cracking of reinforced concrete structures

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

New concrete cracking model established based on fracture mechanics and damage theory

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

A COMPARATIVE STUDY FOR CONCRETE FRACTURE ANALYSIS USING SMEARED-AND DISCRETE-CRACK MODEL

Study on the Constitutive Model of Concrete and Steel for Explicit Dynamic Beam Elements of ABAQUS

Dynamic Damage Constitutive Model for Concrete Accounting for the Difference of the Initial Elastic Modulus

Evaluation of Compressive and Tensile Stress–Strain Parameters of Concrete Damage Plasticity Model for Concrete Slabs Under Impact load

A Static Damage Constitutive Model of Concrete Based on Microscopic Damage Mechanism

Research on Constitutive Model on Dynamical Damage to Concrete Under Condition of Direct Tensile

Dynamic Constitutive Equations for Concrete Based on Meso-Cracks and a Static Constitutive Model

An improved damage-plasticity material model for concrete subjected to dynamic loading