Abstract:A new set of constitutive models named TsingHua University Concrete 2D (THUC2) is developed for use in ABAQUS. THUC2 has reduced mesh sensitivity and is based on the decoupling assumption and the fixed -angle crack assumption in order to consider the pinching effect, confinement, strength degradation, and shear soft- ening of concrete. In the developed biaxial reinforced concrete models, the uniaxial model is first established, and the biaxial model is subsequently assembled from the uniaxial model. First, the proposed uniaxial con- stitutive model of concrete is reported. The mesh sensitivity of the model is reduced by adjusting the descending branch of the concrete model based on mesh size. Second, a total of five biaxial constitutive models of concrete are reported to cover a wide range of simulation requirements in engineering design. Third, the numerical implementation of the proposed concrete model in both ABAQUS implicit and explicit solvers is discussed. Subsequently, the modified two-way fixed angle crack model is validated by monotonic and hysteretic panel tests. The FE model exhibits little mesh sensitivity when the element number increased from 4 to 400. The developed model accurately predicts the pinching effect and the softening effect of the panels. Finally, previous tests on two nuclear containment vessels under lateral loads are simulated, and the modified two-way fixed angle crack model demonstrates adequate accuracy in terms of predicting the initial stiffness, ultimate capacity, and pinching effect. The proposed subroutine package for simulating RC members includes the dominant mechanical behaviors of concrete and can be adopted for high -efficiency simulation of RC shear wall structures.

Study on the Constitutive Model of Concrete and Steel for Explicit Dynamic Beam Elements of ABAQUS

Study on a Uniaxial Constitutive Model of Concrete for Explicit Dynamic Beam Elements of ABAQUS

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Study of Material Constitutive Model for Shear Wall Hysteretic Behavior Analysis

DEVELOPMENT AND APPLICATION OF STEEL-CONCRETE COMPOSITE FIBER BEAM MODEL IN ABAQUS PLATFORM

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Non-Linear Numerical Simulation on Mechanical Behaviour of Steel Reinforced Concrete (SRC) Columns

Numerical modeling on concrete structures and steel-concrete composite frame structures

Biaxial reinforced concrete constitutive models for implicit and explicit solvers with reduced mesh sensitivity

FE Realization of a Thermo-Visco-Plastic Constitutive Model Using VUMAT in ABAQUS/Explicit Program

Finite element analysis of pseudo dynamic behavior of steel reinforced concrete plane frame structure

COMPARISON STUDY OF CONSTITUTIVE MODEL OF CONCRETE IN ABAQUS FOR STATIC ANALYSIS OF STRUCTURES

Study on constitutive model of structural steel under cyclic loading

Mechanical Behavior of Axial Compression Steel Reinforced Concrete Stub with Inner Circular Steel Tube

Nonlinear Analysis of Reinforced Concrete Beam Bending Failure Experimentation Based on ABAQUS

Comparative Investigation on Influences of Concrete Material Constitutive Models on Structural Behavior

ABAQUS modeling for post-tensioned reinforced concrete beams

Comparative study on simulation methods of steel bar in fiber beam element model

Constitutive Model for Full-Range Elasto-Plastic Behavior of Structural Steels with Yield Plateau: Formulation and Implementation

Finite Element Modeling of Steel-concrete Composite Beams with Different Shear Connection Degrees