Abstract:The manufacturing process is inevitably accompanied with the production of scraps, which leads to resource waste and environmental pollution. Recycling and remanufacturing are the most commonly used approaches for metal scraps due to their well-established advantages from economic and environmental perspectives. In this study, spinning experiments with 2195 Al-Li alloy tailor welded blanks produced by friction stir welding from metal scraps were conducted under different process parameter designs. And then the effects of various process parameters on spinning of thin-walled curved surface parts were systematically studied. The results of the corresponding experimental groups show that the roller attack angle, the spinning clearance, and the installation method of tailor welded blanks have the most significant effect on the weld torsion angle. In addition, it was found that along the longitude direction of spun parts, the surface roughnesses of the weld of spun parts were greatly improved under the roller nose radius of 10 mm, the spinning clearance of 1.0 mm, the constant linear velocity, and the installation method of tailor welded blanks (the lower surface of tailor welded blanks is spun by rollers), while the process parameters have little significant effect on the surface roughness along the latitude direction of spun parts. Furthermore, it can be concluded that the forming profiles of spun parts fitted the mandrel well under the roller nose radius of 6 mm, double rollers, the roller attack angle of 30° and 45°, spinning clearance of 1.5 mm, and the installation method of tailor welded blanks (the upper surface of tailor welded blanks is spun by rollers). The research results will provide guidance for the precise spinning of thin-walled curved surface parts with tailor welded blanks. Thereby, it is also beneficial for green manufacturing involving recycling and remanufacturing of metal scraps.

Effect of Spinning Process Parameters on the Forming Quality of Inner and Outer Teeth Shaped Parts

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING

Influence of Process Parameters on Wedging-Spinning of Conical Cup Parts with Bottom Flanges

Numerical simulation and experimental study on multi-pass stagger spinning of internally toothed gear using plate blank

Numerical Simulation of Influence of Roller Working Surface on Spin-Forming of Rectangular Inner Meshing Gear

Spinning of curvilinear generatrix parts without mandrel based on main and auxiliary rollers

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Process factors influencing spinning deformation of thin-walled tubular part with longitudinal inner ribs

Effects of spinning parameters on microstructures of ellipsoidal heads during marginal-restraint mandrel-free spinning

Numerical Investigation of Effects of Deformation Allocation on Multi-Pass Conventional Spinning Process of Curvilinear Generatrix Parts

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

An innovative spinning-rolling process and its intelligent FE modelling for big-tapered profiled ring disk

Study on Deep drawing Forming Process of Wheel Disks

Influence of Inner Roller Geometric Parameters on Counter-Roller Spinning with 6061 Aluminum Alloy Tube

Numerical simulation of spinning forming of A356 aluminum alloy hub using dual spinning rollers

Investigation on the inner hole spiral-groove of cross wedge rolling of hollow shafts with mandrel

Size effects on process performance and product quality in progressive microforming of shafted gears revealed by experiment and numerical modeling

Metal flowing of involute spline cold roll-beating forming

Research on a multi-step spinning process for manufacturing disc-like part with thickened rim

A Systematic Study on the Effects of Process Parameters on Spinning of Thin-Walled Curved Surface Parts With 2195 Al-Li Alloy Tailor Welded Blanks Produced by FSW