Abstract:In recent years, global warming and climate change caused by the greenhouse gas emissions has given rise to widespread concerns. CO2 has been considered as the principal greenhouse gas of interest, and fossil-fuel-fired power plants have been deemed as the largest stationary sources of CO2 emission. It is imperative to capture CO2 from these sources to reduce the global CO2 emissions. Lately, capturing CO2 from flue gas using solid absorbents shows promising for CO2 abatement. For the cost-effective CO2 capture process and the recycling of environmental pollutants, deprecated resources have been utilized for CO2 capture from flue gas. In this work, fly ashes derived from different raw materials were tried as solid CO2 sorbents for flue gas treatment. To improve their CO2 capture capacities, the ashes were modified by different polyamines. An experimental demonstration on CO2 capture behaviors of fresh ashes and modified sorbents in simulated flue gas atmosphere of 40°C, 15% CO2 + 15% H2O and balanced N2 was presented in detail with a fixed-bed reactor system. CO2 capture capacities of fresh ashes were calculated as 0.56 mmolCO2/g, 0.32 mmolCO2/g, 0.44 mmolCO2/g and 0.83 mmolCO2/g, respectively. By contrast, CO2 capture capacities of amine-modified samples had been enhanced as 0.38 mmolCO2/g, 0.65 mmolCO2/g, 1.07 mmolCO2/g, 0.85 mmolCO2/g and 1.17 mmolCO2/g. The optimal sample of TEPA-modified biomass ash (TEPA-BA) with CO2 capture capacity of 1.17mmolCO2/g was screened. The optimal candidate was then selected for further investigation of the effects of temperature, CO2 concentration and H2O concentration on its CO2 capture behaviors. The results indicated that CO2 capture capacity would increase with the increase of temperature in the range of 30 to 40 °C and decrease with the increase of temperature in the range of 40 to 60°C, increase with the increase of CO2 concentration in the range of 5% to 20%, increase with the increase of H2O concentration in the range of 0% to 15% and decrease with the increase of H2O concentration in the range of 15% to 20%. The results in this work could provide basic data as a guidance for further applying the sorbents in practical operations.

High Performance of Fly Ash Derived Li 4Sio4-Based Sorbents for High Temperature CO2 Capture

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Development of a Fly Ash Derived Li4SiO4-based Sorbent for CO2 Capture at High Temperatures

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

High-performance Li4SiO4 Sorbents Prepared from Solid Waste for CO2 Capture

Li4SiO4 Adsorbent Derived from Industrial Biomass Fly Ash for High-Temperature CO2 Capture

Enhanced high temperature cyclic CO2 capture on Li4SiO4 sorbent from two-dimensional SiO2 nanomeshes

Sol-gel Derived, Na/K-doped Li4SiO4-based CO2 Sorbents with Fast Kinetics at High Temperature

High temperature capture of CO2 on Li4SiO4‐based sorbents from biomass ashes

Alkali-Doped Lithium Orthosilicate Sorbents for Carbon Dioxide Capture

Novel Li4SiO4-based Sorbents from Diatomite for High Temperature CO2 Capture

Study on Cyclic Carbonation Property of CaO-based Sorbents Modified With Fly Ash

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Fly Ash-CaO Sorbents Modified with Chlorides and Hydroxides for CO2 Capture in High-Temperature Flue Gas

Development of Stabilized Ca-based CO2 Sorbents Supported by Fly Ash

Fabrication of Efficient and Stable Li4SiO4-based Sorbent Pellets Via Extrusion-Spheronization for Cyclic CO2 Capture

Enhancement of Reactivity in Li4SiO4-based Sorbents from the Nano-Sized Rice Husk Ash for High-Temperature CO2 Capture

High‐Temperature Capture of CO2 on Lithium‐Based Sorbents Prepared by a Water‐Based Sol‐Gel Technique

Fly-Ash-Modified Calcium-Based Sorbents Tailored to Co2 Capture

Studies on Several Fly Ashes and Their Modified Materials for CO2 Capture

Understanding the Competition Between Carbonation and Sulfation of Li4SiO4-based Sorbents for High-Temperature CO2 Capture